Freezing processes for a vertically copper, superhydrophobic, and hybrid patterned surface – A visualization study

Jia-Wei Zheng,Yu-Lieh Wu,Kai-Shing Yang,Bo-Wei Yu,Chi-Chuan Wang

DOI: https://doi.org/10.1016/j.applthermaleng.2023.120447

IF: 6.4

2023-04-04

Applied Thermal Engineering

Abstract:The purpose of this study is to investigate the frost and condensation heat transfer in vertical plate surface with different surface conditions. The test surfaces include a copper surface, a superhydrophobic surface and a novel tree-shaped surface containing hydrophilic and hydrophobic surfaces. Tests was carried out in an environmental chamber subject to various frontal velocity, and relative humidity. The ratio of cold frost area and the heat transfer coefficient (HTC) of are reported and visualization of the condensate/frost formation was analyzed by visual images. The copper surface exhibits obvious filmwise condensation due to its high wettability. Upon frosting, the condensate droplets slide to form thin frost layer which attracts more droplet to yield a thicker frost layer. The superhydrophobic surface offers condensate jumping that can effectively delay the frosting time, thereby showing a better HTC. At a relative humidity of 85 % and a velocity is 2.5 m s −1 , the HTC of the superhydrophobic sample is increased by 42.1 % and the area ratio is decreased by 76.9 % when compared to pure copper surface. Yet, the frosting time of the superhydrophobic surface is 2.6 times longer than that of copper surface. The delay is reduced to 1.85 times when the relative humidity is reduced to 45 %. Upon defrosting also at a relative humidity of 85 %, the surface area of residual water is higher than that of the superhydrophobic surface by 447 % while the surface area of residual water of the pattered surface is lower than that of superhydrophobic surface by 173 %.

energy & fuels,engineering, mechanical,thermodynamics,mechanics