Abstract:Compensated pulse alternators (CPAs) are widely used as a kind of high-power pulse power supply, in which the compensating components can reduce the transient impedance of armature winding, to obtain current pulses with high peak values. In this article, a differential brushless doubly-fed pulsed alternator (BDPA) is proposed, and two sets of windings in the stator of BDPA are decoupled from each other, and each of them is coupled to the self-closing rotor winding. So, when the armature winding is discharged, a compensating current is generated in the rotor and excitation windings, which can increase the discharging current of the armature winding. Due to the absence of brushes, the brushless doubly-fed motor has higher reliability, but the heat generation of an iron core pulse alternator is higher than that of an air core pulse alternator, which may damage the windings in motor, especially brushless doubly-fed motors with three sets of windings. For this reason, the operation mode of periodic intermittent excitation was chosen. The excitation power supply is switched on only when continuous pulse discharges are performed and is switched off for the rest of the time. In this article, a lumped parameter thermal network (LPTN) model is established for a brushless doubly-fed pulse generator, steady-state and transient temperature rises of BDPA are analyzed using this model and compared with the calculation results of finite elements to verify the validity of LPTN model.

Design and Analysis of Halbach Array PM Inner Rotor Slotted Stator Compensated Pulsed Alternator

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

Design and Electromagnetic Performance Analysis of Novel Dual-Armature Π-Core Doubly Salient Permanent Magnet Machines

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

THE MODELING AND CALCULATING ON A NEW TYPE HYBRID CLAW-POLE ALTERNATOR

Optimization Design of a Permanent Magnet Synchronous Generator for a Potential Energy Recovery System

Permanent Magnet Compensated Pulsed Alternator for Driving Air-Based Loads

Optimization Design of an Interior Permanent-Magnet Synchronous Machine for a Hybrid Hydraulic Excavator

Development and Analysis of a Novel Cascaded Brushless Self-Excited Air-Core Compensated Pulsed Alternator With Squirrel-Cage Rotor Winding

Thermal Performance Research of Brushless Doubly-Fed Pulse Alternator Based on Differential Modulated Rotor Winding

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

A Semi-Analytical Approach for the Optimization of High-Speed PMSM with Halbach Magnet Array

Design and Optimization of Halbach-Array PM Rotor for High-Speed Axial-Flux Permanent Magnet Machine With Ironless Stator

Design and Performance Analysis of Dual-Stator Brushless Doubly-Fed Machine with Cage-Barrier Rotor

Design of Interior PM Synchronous Traction Motor with Novel Approximate Skewed Rotor

Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine with an Advanced Step-Skewed Rotor Design.

Study on pulse shaping optimization of multiphase compensated pulsed alternator

Nonlinear Analytical Model of a Double-Stator Flux Reversal Halbach Array Permanent Magnet Machine

Study on the Influences of an Outer-Coreless-Rotor Permanent Magnet Synchronous Machine Using Halbach Magnet Array