Abstract:In the process of underground construction, it is common to spray concrete on the working surface, which will form a concrete-rock composite structure, to achieve the expected reinforcement effect. Compared with pure concrete or rock structures, composite structures have different mechanical properties, energy evolution and damage characteristics. Understanding the dynamic mechanics and damage characteristics of composite structures under impact loads is important to the safety of underground engineering construction. First, dynamic compression tests on different grades of mortar-sandstone composite specimens were carried out by using a Hopkinson pressure bar system to discuss the effect of impact velocities on the mechanical properties and failure modes of composite specimens. The results show that the dynamic peak stress, strain energy density and fragmentation block of the mortar-sandstone composite have an obvious strain rate effect. With an increase in impact velocity, the internal cracks of the sample do not have sufficient time to expand, and the energy absorbed by the sample leads to the continuous initiation of new cracks in the sample, resulting in an increasing damage degree of composite specimens. The increase in mortar strength can significantly increase the peak stress, improve the load-bearing capacity of the sample, and reduce the degree of sample damage. At the same impact velocity, the fragmentation degree of the mortar sample is more severe than that of sandstone, and the mortar sample is broken into powder debris, while the sandstone is broken into fragments. In addition, according to the failure properties of the composite sample, the mortar and sandstone samples are described by different damage models, and the dynamic damage constitutive model of the mortar-sandstone composite is established based on the overlay principle. The dynamic test results were fitted. The research shows that the fitting curves of the model are well fitted with the test curves and that the model accurately reflects the changes in the mechanical parameters of the composite specimens.

Dynamic analysis of an impact load applied to the composite wall structure

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

Analysis on Reinforce Concrete Sandwich Wall-Panel Using Nonlinear Finite Element Method

Dynamic Analysis of Structural Columns Subjected to Impulsive Loading

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Numerical Analysis of Low-Velocity Impact Behaviour of Protective Concrete-Filled Steel Plates Composite Wall

Recent Advances of Dynamic Mechanical Behavior of Concrete under Impact Loading

Numerical analysis of reinforced concrete beams subjected to impact loads

Analytical Study on Reinforced Concrete Columns and Composite Columns under Lateral Impact

Effect of the axial load on the dynamic response of the wrapped CFRP reinforced concrete column under the asymmetrical lateral impact load

Finite Element Analyses on the Soft Projectile Impact Testing of a Wall-floor-wall Reinforced Concrete Structure

Dynamic Response of Foam Core Sandwich Panel with Composite Facesheets During Low-Velocity Impact and Penetration

Impact Action Between Concrete Blocks in Collapse Analysis of Reinforced Concrete Structures

Impact and Post-Impact Performance of Sandwich Wall Boards with GFRP Face Sheets and a Web-Foam Core: The Effects of Impact Location

Impact Failure Analysis of Reinforced Concrete Structural Components by Using Finite Element Method

Impact Responses of Composite Cushioning System Considering Critical Component with Simply Supported Beam Type

The Influence of Low-Energy Impact Loads on the Properties of the Sandwich Composite with a Foam Core

Dynamic and Damage Characteristics of Mortar Composite under Impact Load

Experimental-Numerical Failure Analysis of Thin-Walled Composite Columns Using Advanced Damage Models

Numerical Analysis of the Impact Resistance of Partially Precast Concrete Beams and Prediction of the Displacement Response

Impact Analysis of Composite Sandwich I-Lam System