Abstract:Due to its cost-effectiveness and high specific capacity, P2-type manganese (Mn) oxide is considered a highly promising cathode material for sodium ion batteries (SIBs). However, the practical application of this material is hindered by poor cyclic stability caused by the phase transition of P2-P'2 due to the Jahn-Teller effect of Mn 3+ at low voltage and significant volume changes at high voltage. In this study, we utilized Mo 6+ dual-function P2-Na 0.67 Mn 0.99 Mo 0.01 O 1.997 (PO 4 ) 0.0008 (NMMPO-1) to achieve exceptional magnification performance and cycle stability. Advanced electron microscopy and X-ray diffraction analysis revealed that Mo 6+ acts as a pillar in replacing interlayer Na + sites within the P2 phase, resulting in extended layer spacing and a stable crystal structure. Additionally, Mo 6+ substitution for Mn 3+ weakens the Jahn-Teller distortion effect of Mn 3+ . Ex-situ X-ray diffraction experiments demonstrated that NMMPO-1 effectively inhibits the P2-P'2 phase transition at low voltage while minimizing volume changes during charge–discharge cycles. Overall, our modified NMMPO-1 exhibits excellent cycle stability with 144.55 mA h g −1 after 100 cycles at 0.5C, retaining 83 % capacity retention rate, along with impressive rate performance achieving capacity of 100.57 mA h g −1 at 5C. Furthermore, NMMPO-1 demonstrates superior air stability compared to unmodified samples when exposed to air over multiple cycles. Moreover, through detailed analysis using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic intermittent titration technique (GITT) curves; it is observed that NMMPO-1 possesses enhanced Na + diffusion capacity and kinetic properties compared to other materials. This research provides novel insights into the role of substituting high valence cations in layered Mn oxide materials which can contribute towards designing improved performance for future sodium ion battery applications.

Understanding the Role of Mn Substitution for Boosting High‐Voltage Na4Fe3‐xMnx(PO4)2P2O7 Cathode in Sodium‐Ion Batteries

An Air-stable Iron/manganese-based Phosphate Cathode for High Performance Sodium-ion Batteries

Mn-doped Na4Fe3(PO4)2(P2O7) facilitating Na+ migration at low temperature as a high performance cathode material of sodium ion batteries

Experimental and theoretical investigation of cobalt and manganese substitution in Na4Fe3(PO4)2P2O7 as a high energy density cathode material for sodium-ion batteries

Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode

Sufficient Utilization of Mn 2+ /Mn 3+ /Mn 4+ Redox in NASICON Phosphate Cathodes towards High‐Energy Na‐Ions Batteries

Mo 6+ bifunctional substitution of P2-type manganese oxide for high performance sodium-ion batteries

Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode

Mn vacancy engineering design of Fe/Mn based cathodes for breaking the spell between "sodium limiting" in air-stabilization and "sodium promoting" on kinetics

Robust iron-based cathode for ultralong-lasting Na-ion battery with a wide operation-temperature

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries

Rationally designed NASICON-type Na3.75V1.25Mn0.75(PO4)3 cathode towards long life-span sodium ion batteries

P2‐Type Na0.67Ni0.23Fe0.1Mn0.67O2 Cathode Material with Suppressed P2−O2 Phase Transition for Sodium‐Ion Batteries

Heteroatom-Substituted P2–Na 2/3 Ni 1/4 Mg 1/12 Mn 2/3 O 2 Cathode with {010} Exposing Facets Boost Anionic Activity and High-Rate Performance for Na-Ion Batteries

Mn-Rich Phosphate Cathodes for Na-Ion Batteries with Superior Rate Performance

Single-crystalline Mg-substituted Na4Mn3(PO4)2P2O7 nanoparticles as a high capacity and superior cycling cathode for sodium-ion batteries

High‐Energy‐Density Cathode Achieved via the Activation of a Three‐Electron Reaction in Sodium Manganese Vanadium Phosphate for Sodium‐Ion Batteries

Sodium‐Rich, Co‐Ni‐Free P2‐Layered Manganese Oxide Cathodes for Sodium‐Ion Batteries

Electrochemical performance of Na4MnCr(PO4)3/C cathode affected by different transition metal dopants for sodium ion batteries

P3-type layered Na0.26Co1−xMnxO2 cathode induced by Mn doping for high-performance sodium-ion batteries

High-performance P2-Type Fe/Mn-based Oxide Cathode Materials for Sodium-Ion Batteries