Abstract:<p>Drilling rate of penetration (ROP) prediction is an enormously important step to optimize drilling controllable parameters. Therefore, numerous efforts have been done in order to present a more precise estimator model that is still ongoing. The results of the literature review indicated that, between the two approaches followed for ROP modeling, namely physic-based models and data-driven methods, the use of the data-driven methods has grown significantly. The literature review made two points clear: (1) the geomechanical parameters were not considered adequately, and (2) no previous research had applied a combination of least-squares support-vector machines (LSSVM) with cuckoo optimization algorithm (COA), particle swarm optimization (PSO), and genetic algorithms (GA). This led us to use hybrid algorithms for ROP modeling at vertical wells drilled in the southwestern Iran. For this purpose, mud logging parameters (including depth (Depth), mud density (MD), torque (Tor), standpipe pressure (SPP), equivalent circulating density (ECD), weight on bit (WOB), revolutions per minute (RPM), flow rate (FR), and ROP) and geomechanical parameters (including gamma ray (GR), porosity (NPHI), density (RHOB), and uniaxial compressive strength (UCS)) were collected along the studied wells. Histogram analysis and pairwise evaluation of the studied features indicated the presence of outliers among the data points. Accordingly, the Tukey's method was used to omit the outliers. Subsequently, the most relevant features in the ROP prediction were selected using a combination of the non-dominated sorting genetic algorithm II (NSGA-II) with multilayer perceptron (MLP) neural network. The results showed that one could attenuate the modeling error by increasing the number of input parameters into the ROP estimation model. However, the improvement was very subtle when the number of input parameters exceeded six. Therefore, six parameters (UCS, FR, WOB, Depth, MD, and RPM) were used for ROP modeling using LSSVM-COA, LSSVM-PSO, and LSSVM-GA hybrid algorithms. Results of applying these hybrid algorithms indicated that the LSSVM-COA outperformed the other two algorithms in terms of accuracy and the coefficient of determination. In a next step, the LSSVM-COA was trained on both the outlier-omitted and raw datasets, indicating the important role of the outlier omission step in achieving a highly accurate and reliable model. Continuing with the work, in order to evaluate the performance of the LSSVM-COA hybrid model, the model was compared to support-vector regression (SVR)-COA, MLP-COA, Motahhari's, linear multivariate regression (LMR), and nonlinear multivariate regression (NLMR) models. The results confirmed superior accuracy of the LSSVM-COA model over the examined models. The small difference between the obtained levels of error in the training and testing stages with the LSSVM-COA model, as compared to the other models, revealed that the model can be used to predict the ROP at other wells across the field reliably and accurately provided the model be developed with larger sets of data across the field. Predicting ROP with high accuracy at the test Well clearly proved this claim.</p>

Robust Machine Learning Predictive Models for Real-Time Determination of Confined Compressive Strength of Rock Using Mudlogging Data

A novel data-driven model for real-time prediction of static Young's modulus applying mud-logging data

Machine Learning Approach to Model Rock Strength: Prediction and Variable Selection with Aid of Log Data

Applied machine learning-based models for determining the magnitude of pore pressure and minimum horizontal stress

Developing a new rigorous drilling rate prediction model using a machine learning technique

Performance assessment of rotary drilling using non-linear multiple regression analysis and multilayer perceptron neural network

Robust machine-learning workflow for subsurface geomechanical characterization and comparison against popular empirical correlations

A Deep Learning Method for the Prediction of the Index Mechanical Properties and Strength Parameters of Marlstone

Real-time prediction of Poisson’s ratio from drilling parameters using machine learning tools

Predicting Triaxial Compressive Strength of High-Temperature Treated Rock Using Machine Learning Techniques

Predicting Angle of Internal Friction and Cohesion of Rocks Based on Machine Learning Algorithms

Scaling-up dynamic elastic logs to pseudo-static elastic moduli of rocks using a wellbore stability analysis approach in the Marun oilfield, SW Iran

Machine learning for prediction of the uniaxial compressive strength within carbonate rocks

Hybrid machine learning-based triaxial jointed rock mass strength

Artificial Intelligence Models for Real-Time Bulk Density Prediction of Vertical Complex Lithology Using the Drilling Parameters

Machine learning application to predict in-situ stresses from logging data

Intelligent Prediction for Rock Porosity While Drilling Complex Lithology in Real Time

An advanced computational intelligent framework to predict shear sonic velocity with application to mechanical rock classification

Intelligent Approaches for Predicting the Intact Rock Mechanical Parameters and Crack Stress Thresholds

ANN Model for Predicting Mud Loss Rate from Unconfined Compressive Strength and Drilling Data

Estimation of geomechanical units using petrophysical logs, core and supervised intelligent committee machine method to optimize exploration drilling operations