Abstract:<p>Drilling rate of penetration (ROP) prediction is an enormously important step to optimize drilling controllable parameters. Therefore, numerous efforts have been done in order to present a more precise estimator model that is still ongoing. The results of the literature review indicated that, between the two approaches followed for ROP modeling, namely physic-based models and data-driven methods, the use of the data-driven methods has grown significantly. The literature review made two points clear: (1) the geomechanical parameters were not considered adequately, and (2) no previous research had applied a combination of least-squares support-vector machines (LSSVM) with cuckoo optimization algorithm (COA), particle swarm optimization (PSO), and genetic algorithms (GA). This led us to use hybrid algorithms for ROP modeling at vertical wells drilled in the southwestern Iran. For this purpose, mud logging parameters (including depth (Depth), mud density (MD), torque (Tor), standpipe pressure (SPP), equivalent circulating density (ECD), weight on bit (WOB), revolutions per minute (RPM), flow rate (FR), and ROP) and geomechanical parameters (including gamma ray (GR), porosity (NPHI), density (RHOB), and uniaxial compressive strength (UCS)) were collected along the studied wells. Histogram analysis and pairwise evaluation of the studied features indicated the presence of outliers among the data points. Accordingly, the Tukey's method was used to omit the outliers. Subsequently, the most relevant features in the ROP prediction were selected using a combination of the non-dominated sorting genetic algorithm II (NSGA-II) with multilayer perceptron (MLP) neural network. The results showed that one could attenuate the modeling error by increasing the number of input parameters into the ROP estimation model. However, the improvement was very subtle when the number of input parameters exceeded six. Therefore, six parameters (UCS, FR, WOB, Depth, MD, and RPM) were used for ROP modeling using LSSVM-COA, LSSVM-PSO, and LSSVM-GA hybrid algorithms. Results of applying these hybrid algorithms indicated that the LSSVM-COA outperformed the other two algorithms in terms of accuracy and the coefficient of determination. In a next step, the LSSVM-COA was trained on both the outlier-omitted and raw datasets, indicating the important role of the outlier omission step in achieving a highly accurate and reliable model. Continuing with the work, in order to evaluate the performance of the LSSVM-COA hybrid model, the model was compared to support-vector regression (SVR)-COA, MLP-COA, Motahhari's, linear multivariate regression (LMR), and nonlinear multivariate regression (NLMR) models. The results confirmed superior accuracy of the LSSVM-COA model over the examined models. The small difference between the obtained levels of error in the training and testing stages with the LSSVM-COA model, as compared to the other models, revealed that the model can be used to predict the ROP at other wells across the field reliably and accurately provided the model be developed with larger sets of data across the field. Predicting ROP with high accuracy at the test Well clearly proved this claim.</p>

ANN Model for Predicting Mud Loss Rate from Unconfined Compressive Strength and Drilling Data

Prediction of Rheological Properties of Recirculating Water-Based Drilling Mud in Geothermal Exploration using Artificial Neural Networks with Tensor Flow

Artificial Neural Network Prediction of Wellbore Stability in Offshore Shallow Formations

A Developed Robust Model and Artificial Intelligence Techniques to Predict Drilling Fluid Density and Equivalent Circulation Density in Real Time

A New Model for Predicting Surface Pump Pressure of Drilling Rig Using Artificial Neural Network

Real-Time Prediction of the Rheological Properties of Water-Based Drill-In Fluid Using Artificial Neural Networks

Real-Time Prediction of Rheological Properties of Invert Emulsion Mud Using Adaptive Neuro-Fuzzy Inference System

Conventional and intelligent models for detection and prediction of fluid loss events during drilling operations: A comprehensive review

Hybrid machine learning algorithms to enhance lost-circulation prediction and management in the Marun oil field

Technical system for mud loss analysis and diagnosis in drilling engineering to prevent reservoir damage

Intelligent Lost Circulation Monitoring Method Based on Data Augmentation and Temporal Models

Application of soft computing approaches for modeling annular pressure loss of slim-hole wells in one of Iranian central oil fields

Analysis of rate of penetration prediction in drilling using data-driven models based on weight on hook measurement

Lost-circulation diagnostics using derivative-based type-curves for non-Newtonian mud leakage into fractured formation

Data-Driven Framework for Real-time Rheological Properties Prediction of Flat Rheology Synthetic Oil-Based Drilling Fluids

Estimation of Cuttings Concentration and Frictional Pressure Losses During Drilling Using Data-Driven Models

Prediction of Leakage Pressure during a Drilling Process Based on SSA-LSTM

Predicting Rate of Penetration and optimization Weight on bit using Artificial Neural Networks

Combined APSO-ANN and APSO-ANFIS models for prediction of pressure loss in air-water two-phase slug flow in a horizontal pipeline

Prediction of Lost Circulation in Southwest Chinese Oil Fields Applying Improved WOA-BiLSTM

Developing a new rigorous drilling rate prediction model using a machine learning technique