Abstract:This manuscript is aimed to address the problem in the automatic loading system of artillery, where the position tracking accuracy of the chain‐type rotary shell magazine is compromised due to the load variation and external disturbance under actual working conditions. The authors propose a non‐cascade robust generalised predictive control method that extends the conventional generalised predictive control to the second order. Meanwhile, a sliding mode compensation structure is introduced to ensure extremely high tracking accuracy even in the face of wide‐ranging load variations. The realisation of fast position tracking control and strong robust control of the chain‐type rotary shell magazine in the complex systems such as the large calibre howitzer has been the focus and challenge of research. The predictive control strategies can achieve a fast dynamic response, but it relies on the system model. By integrating the generalised predictive control method with sliding mode theory, a novel robust generalised predictive position control method is proposed. Firstly, a non‐cascade position tracking controller is designed based on the continuous‐time model of the systems; then, a sliding mode compensation structure is introduced to address the degradation of control performance due to load variations and external disturbances. The scheme utilises the sliding mode switching term to overcome the effects caused by the disturbances while preserving the fast dynamic response characteristics of the original predictive control. Moreover, the disturbance observer is designed to further enhance the robustness by producing corresponding compensation according to the perturbation quantity. The proposed controller has been validated in a shell magazine test bench, indicating its superior position control performance of the shell magazine under different load conditions.

Robust generalised predictive position control for chain‐type rotary shell magazine with disturbance observer

Nonlinear adaptive position tracking of an electro-hydraulic actuator

Nonlinear Motion Control of a Hydraulic Press Based on an Extended Disturbance Observer

Disturbance Observer Based Position Tracking of Electro-Hydraulic Actuator

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Extended state observer-based finite time position control of rotational shell magazine via higher order sliding mode technique

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

A Composite Adaptive Robust Control for Pneumatic Servo Systems with Time-Varying Inertia

Robust Adaptive Fuzzy Sliding Mode Control Based on Fuzzy Compensation for Ammunition Auto-loading Robot

Study on position tracking algorithm of large-inertia artillery with terminal sliding mode control

Dual extended state observer–based prescribed performance control of output-constrained hydraulic-driven barrel pitching servo system

Robust Tracking Control of an XY Compliant Nanomanipulator with Variable Loads.

Research on Position and Torque Loading System with Velocity-Sensitive and Adaptive Robust Control

On the Robust Control of Compliantly Actuated Robots with Mismatched Disturbances

Tracking Control of a Linear Motor Positioner Based on Barrier Function Adaptive Sliding Mode

Adaptive robust feedback control of moving target tracking for all - Electrical tank with uncertainty

Sliding-mode control of electro-hydraulic positioning tracking system combining K-observer and nonlinear disturbance observer

Position Control for a Hydraulic Loading System Using the Adaptive Backsliding Control Method

Cascaded Continuous Sliding Mode Control for Tracked Mobile Robot Via Nonlinear Disturbance Observer

The Impact-point Prediction of Projectile for Moving Tank Based on Adaptive Robust Constraint-following Control