Agglomeration and transformation of different types of inorganic potassium in biomass during co-gasification with coal

Zi-Meng He,Yu-Jie Deng,Jing-Pei Cao,Xiao-Yan Zhao
DOI: https://doi.org/10.1016/j.fuel.2023.129728
IF: 7.4
2023-09-11
Fuel
Abstract:Co-gasification of biomass and coal has many advantages, which also mitigates some of the ash-related problems induced by potassium (K) in biomass. However, this effect varies with the occurrence mode of inorganic K in biomass, which varies with the species of biomass. Therefore, the present work investigated the effect of a bituminous coal on the transformation of K and the ash chemistry of bed agglomeration (without considering the effect of fluidization) during co-gasification (steam and CO 2 atmospheres) for different types of inorganic K (K 2 CO 3 , K 2 SO 4 and KCl) in biomass. The results show that for both K 2 CO 3 and K 2 SO 4 in biomass, K is mainly retained as KAlSiO 4 and K 2 SO 4 in the gasification ash with KAlSiO 4 being the dominant phase. In addition, for K 2 CO 3 in biomass, more KAlSiO 4 and less K 2 SO 4 are formed under the steam atmosphere than under the CO 2 atmosphere. However, the K retention of the ash or the agglomerate for both K 2 CO 3 and K 2 SO 4 in biomass is similar and is much higher than that for KCl in biomass, which tends to release and to induce other ash-related problems. In addition, both the organic compounds of coal and the gasification atmosphere significantly alter the reaction between coal with KCl in biomass: The majority of KCl reacts with coal to form KAlSiO 4 , the formation of which is quite limited for the coal ash; More K is retained in the ash and more KAlSiO 4 is formed under the steam atmosphere than under the CO 2 atmosphere. Lastly, although co-gasification with coal (silica sand as the bed material) cannot stop the formation of agglomerates for K 2 CO 3 , K 2 SO 4 and KCl in biomass, these agglomerates are more easily to be broken than those produced from the gasification of biomass alone, thus mitigating bed agglomeration in fluidized-bed reactors.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?