Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

Comprehensive Armature Reaction Modeling and Flux Weakening Optimization of a Surface Permanent Magnet Vernier Motor

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Performance Investigation of a Novel Multi-Tooth Switched-Flux Linear Motor

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

Flux-Weakening Capability Enhancement Design and Optimization of a Controllable Leakage Flux Multilayer Barrier PM Motor

Strength Analysis for Surface-mounted Permanent Magnet Rotor in High-Speed Motor

An improved subdomain modeling technique for surface-mounted permanent magnet Vernier motor

Design and Analysis of a New Hybrid Excitation Vernier Motor with Reduced Permanent Magnet

Design and performance analysis of a novel flux-concentrating fault tolerant permanent magnet vernier machine for rim driven thruster

Analysis and Research on No-Load Air Gap Magnetic Field and System Multi-Objective Optimization of Interior PM Motor

Design Considerations, Analysis and Comparison for High-performance Surface Permanent Magnet Vernier Machines

Comparative Analysis and Design Optimization of Ferrite-Based Surface PM Vernier Machines

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II