Abstract:A new ion soft landing instrument has been built for the controlled deposition of mass selected polyatomic ions. The instrument has been operated with an electrospray ionization source; its major components are an electrodynamic ion funnel to reduce ion loss, a 90-degree bent square quadrupole that prevents deposition of fast neutral molecules onto the landing surface, and a novel rectilinear ion trap (RIT) mass analyzer. The ion trap is elongated (inner dimensions: 8 mm x 10 mm x 10 cm). Three methods of mass analysis have been implemented. (i) A conventional mass-selective instability scan with radial resonance ejection can provide a complete mass spectrum. (ii) The RIT can also be operated as a continuous rf/dc mass filter for isolation and subsequent soft landing of ions of the desired m/z value. (iii)The 90-degree bent square quadrupole can also be used as a continuous rf/dc mass filter. The mass resolution (50% definition) of the RIT in the trapping mode (radial ion ejection) is similar to 550. Ions from various test mixtures have been mass selected and collected on fluorinated self-assembled monolayers on gold substrates, as verified by analysis of the surface rinses. Desorption electrospray ionization (DESI) has been used to confirm intact deposition of [Val(5)]-Angiotensin I on a surface. Nonmass selective currents up to 1.1 nA and mass-selected currents of up to 500 pA have been collected at the landing surface using continuous rf/dc filtering with the RIT. A quantitative analysis of rinsed surfaces showed that the overall solution-to-solution soft landing yields are between 0.2 and 0.4%. Similar experiments were performed with rf/dc isolation of both arginine and lysine from a mixture using the bent square quadrupole in the rf/dc mode. The unconventional continuous mass selection methods maximize soft landing yields, while still allowing the simple acquisition of full mass spectra.

Writing with Mass-Selected Ions Using a Dynamic Field Wien Filter

Mass Selection of Ions from Beams Using Waveform Isolation in Radiofrequency Quadrupoles

A compact electron beam ion source with integrated Wien filter providing mass and charge state separated beams of highly charged ions

Multifunctional Acoustofluidic Centrifuge Device Using Tri-Symmetrical Design for Particle Enrichment and Separation and Multiphase Microflow Mixing

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

A new system for sample synthesis, preparation and modification combined with in-situ depth profiling using medium energy ions

Three-Dimensional Electro-Sonic Flow Focusing Ionization Microfluidic Chip For Mass Spectrometry

Novel Chemical Ion Source for a High-Field Asymmetric Waveform I Mobility Spectrometer Used under Ambient Conditions

Ion Soft Landing Using a Rectilinear Ion Trap Mass Spectrometer

Spatial Filtering of Zeeman Sub-States in an Atomic Fountain.

Development of 1.2-GHz ECR ion source and Wien filter for inexpensive ion beam processing system

Improving Spatial and Elemental Associations in Analytical Field Ion Microscopy

An active transverse energy filter to differentiate low energy particles with large pitch angles in a strong magnetic field

Concentration of Microparticles/Cells Based on an Ultra-Fast Centrifuge Virtual Tunnel Driven by a Novel Lamb Wave Resonator Array

SWIFTSIN: A High-Resolution Ion Isolation Waveform for the Miniaturized Linear Ion Trap Mass Spectrometer by Coarse to Fine Excitation

Possibility of operating quadrupole mass filter at high resolution

An integrated instrument of a tandem quadrupole mass spectrometer for cluster reaction and soft-landing deposition

Improving the efficiency of soft electron ionization by using the oscillatory movement of electrons

Electrostatic Spray Ionization Mass Spectrometry Imaging.

Ion transfer between ion source and mass spectrometer inlet: electro-hydrodynamic simulation and experimental validation

A MICROFLUIDIC CHIP BASED ELECTROS- PRAY INTERFACE FOR MASS SPECTROMETRY WITH A LOW-TEMPERATURE ALLOY MICRO- ELECTRODE