Abstract:The dynamic temperature data of a transformer can be utilized to accurately assess its load capability and operational longevity. This paper presents a study on the temperature rise characteristics of hot-spots in dry-type transformer windings and develops a extrapolative computational model based on various load rates, utilizing the results of transformer temperature rise tests. Firstly, the dynamic temperature rise characteristics of B-phase low-voltage (LV) winding and high-voltage (HV) winding hot-spot, along with its correlation calculation model with varying load rates, were determined based on the results of temperature rise tests. Subsequently, an extrapolative computational model for the temperature rise of the winding hot-spot, utilizing a three-section continuous load application approach, was proposed employing the lumped parameter method. The validity of this model was confirmed through verification. Lastly, a temperature rise test was conducted on another dry-type transformer to validate the universality of the model. Finally, a different dry-type transformer is chosen, and a temperature rise test is conducted to confirm the general applicability of the model. The results indicate that the calculation model for the hot-spot temperature rise of the winding under three consecutive loads is associated with the dynamic temperature rise pattern of the hot-spot of the winding between the temperature rise test with a small load rate and the temperature rise test with a large load rate. The maximum deviation between the hot-spot temperature rise test of the winding of SCB14-800/10-NX2 transformer and the results of the steady-state temperature rise value calculation is only 1.3 K, with a maximum error of the time constant value of the temperature rise being only 0.05 h. Similarly, the maximum deviation of the steady-state temperature rise value obtained from the hot-spot temperature rise test and the extrapolative computation of SCB-1250kVA/10 kV transformer winding is only 2.03 K, with a maximum error of the temperature rise time constant value being only 0.09 h. The extrapolative computational model proposed in this study conducts the temperature rise test under a small load rate instead of a large load rate, addressing the industry challenge of the challenging implementation of transformer on-site temperature rise tests and high power loss. This approach enhances inspection efficiency.

Estimation Method of Remaining Life and Hot Spot Temperature According to Real-Time Transformer Load Pattern Process

Research on economic remaining life of power transformers based on the lifetime data

Economic Life Prediction of Power Transformers Based on the Lifetime Data

Research on Remaining Useful Lifetime Prediction Methods of Main Transformer in Nuclear Power Station

Research on Deterioration Mechanism of Oil-paper Insulation of 220 Kv Current Transformer

Transformer Real-Time Reliability Model Based on Operating Conditions

Residual Lifetime Evaluation of Power Transformers Based on Data Fusion and Wiener Model

Investigating temperature rise dynamics at hot-spots within dry-Type transformer windings: A comparative analysis across varied loading rates and an extrapolative computational model

Innovative Transformer Life Assessment Considering Moisture and Oil Circulation

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing

Prediction of remaining life of power transformers based on left truncated and right censored lifetime data

Transformer hot spot temperature estimation through adaptive neuro fuzzy inference system approach

Nonparametric Regression-Based Failure Rate Model for Electric Power Equipment Using Lifecycle Data

A Preliminary Study of Transformer Life Estimation Based on Linear Cumulative Damage Theory

Ageing diagnosis and life estimation of paper insulation for operating power transformer

An Opportunity Cost Based Replacement Strategy for Transformers

Comprehensive Method for Determining Transformer Decommissioning Life Considering Economic Life and Physical Life

Loss of Life Estimation of Distribution Transformers Considering Corrupted AMI Data Recovery and Field Verification

Life Monitoring and Evaluation Strategy of Traction Transformer on Freight Line

An Estimation Method for Real-Time Thermal Capacity of Traction Transformers Under Unbalanced Loads

Real-Time Early Warning Method of Distribution Transformer Load Considering Meteorological Factor Data