Abstract:Uncontrollable growth of lithium (Li) dendrite has severely hindered the development of Li metal anodes, while separator modification is regarded as a simple and effective way to mitigate the growth of Li dendrite. However, the "drop-dregs" phenomenon of coating layer desquamated from polyolefin separator due to their different Young's modulus would induce a nonuniform Li ionic flux, finally resulting in deteriorative electrochemical performance and even thermal runaway of the battery. Herein, we introduce a novel nanopile mechanical interlocking strategy to create delamination-free separator modification, which could stably generate a homogeneous Li ionic flux to guide long-term uniform Li deposition. Both experimental and simulation results demonstrate a strong bonding strength between the coating layer and membrane matrix based on this physical interlocking mechanism. Consequently, with a nearly dendrite-free Li deposition and a largely reduced interface impedance, 1000 h stable cycling of Li/Li half cells enrolled this modified separator is successfully achieved. Also, a significant improvement in Li/LiFePO<sub>4</sub> full cells in long-term cycling stability to 500 cycles further indicates its promising practical potential. Moreover, this presented approach without any binding agents or surface activation procedures could be facilely scaled up, providing an applicable and durable separator modification solution toward stable Li metal anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08776?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08776</a>.Characterization and electrochemical properties of the separator and the samples prepared with different growth conditions; morphologies and chemical composition characterizations of the separators and Li metal anodes at different cycling states (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08776/suppl_file/am0c08776_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Designed Lithiophilic Carbon Channel on Separator to Regulate Lithium Deposition Behavior

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Improving Cyclability of Lithium Metal Anode Via Constructing Atomic Interlamellar Ion Channel for Lithium Sulfur Battery

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

A Functional SnS 2 -Engineered Separator for Durable and Practical Lithium Metal Battery

Regulating Li‐ion Flux Through a Dense Yet Highly Ionic Conductive Interlayer for Stable Li Deposition

Dendrite-free Lithium Metal Anode Enabled by Separator Engineering Via Uniform Loading of Lithiophilic Nucleation Sites

Nano-channel-based physical and chemical synergic regulation for dendrite-free lithium plating

Regulating Lithium Nucleation Via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Dendrite-free lithium anode achieved under lean-electrolyte condition through the modification of separators with F-functionalized Ti3C2 nanosheets

Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator

In-Situ Electrodeposition of Nanostructured Carbon Strengthened Interface for Stabilizing Lithium Metal Anode

Nanopile Interlocking Separator Coating toward Uniform Li Deposition of the Li Metal Anodes

Tailoring Lithium Deposition Via an SEI‐Functionalized Membrane Derived from LiF Decorated Layered Carbon Structure

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

Clay‐Originated Two‐Dimensional Holey Silica Separator for Dendrite‐Free Lithium Metal Anode

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Vertically Aligned Lithiophilic CuO Nanosheets on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal Anode

Constructing an Anion-Braking Separator to Regulate Local Li+ Solvation Structure for Stabilizing Lithium Metal Batteries.