Abstract:<p>Bituminous materials release plenty of heat and hazardous volatiles when exposed to high temperature. To develop a sustainable and efficient composite flame retardant (CFR) of bituminous materials, new compositional formulation proportions of selected Ca-Al hydrotalcite (CAHC), ammonium polyphosphate (APP), coated red phosphorus (CRP) and expanded vermiculite (EV) in the prepared CFR were confirmed. Then the inhibitory effects of CFR on non-isothermal combustion kinetics characteristics of bitumen and the dynamic release processes of various volatile constituents were discussed using thermogravimetry/differential scanning calorimeter-mass spectrometer-Fourier transform infrared spectroscopy (TG/DSC- MS-FTIR) combined approach. Test results suggest that the combustion processes of bitumen and CFR bitumen mainly include obvious multistage exothermic reactions. When the heating rate is elevated, the incomplete combustion of bitumen and CFR bitumen is increased, and more heat and volatiles are emitted. Further, as the bituminous temperature is gradually raised, the CAHC, APP, CRP and EV in added CFR are decomposed in turn to inhibit the multistage combustion process of bitumen, showing comprehensive and synergistic flame retarding effects due to dilution, cooling, and insulation. Therefore, the combustion of bituminous four components is correspondingly inhibited by the matched flame retardant in CFR so that the bituminous thermal stability is obviously improved by added CFR. Additionally, the CFR produces thicker intumescent layer on bitumen, which insulates bitumen with oxygen, and decreases the volatile release and molten droplet formation. Fewer macromolecular volatiles are emitted from CFR bitumen than those from bitumen. Moreover, the dynamic release process of various volatile constituents during the bituminous combustion is efficiently suppressed by CFR. The developed CFR plays an important role of flame retarding and smoke suppressing functions, providing an efficient and green flame retardant for bituminous materials when exposed to a fire.</p>

TG- MS study on in-situ sulfur retention during the co-combustion of reclaimed asphalt binder and wood sawdust

Insights into in-situ sulfur retention by co-combustion of dyeing sludge and wood sawdust

PREPARATION OF RDF USING SCREENING RESIDUES OF MSW AS RAW MATERIALS AND STUDY ON ITS COMBUSTION CHARACTERISTICS

Co-combustion behavior of dyeing sludge and rice husk by using TG-MS: Thermal conversion, gas evolution, and kinetic analyses

Sulfur migration mechanism of pig manure in supercritical water: A combined experimental and DFT study

Investigation of the Characteristics of Catalysis Synergy During Co-Combustion for Coal Gasification Fine Slag with Bituminous Coal and Bamboo Residue

Interactive Effect of the Sorted Components of Solid Recovered Fuel Manufactured from Municipal Solid Waste by Thermogravimetric and Kinetic Analysis.

Effects of Municipal Solid Waste Component on Gasification Performance and Chromium Partitioning Behavior under CO2 Atmosphere

Experimental Investigation on Co-firing of Coal and Refuse-derived Fuel in a Pilot-scale Circulating Fluidized Bed Combustor

Experiments of Sulfur Removal in 1MW Poly-Generation System with Partial Gasification and Combustion Combined

THE STUDY OF SULFUR TRANSFORMATIONS IN BIOMASS COMBUSTION

Evaluation of the Thermal Behavior, Synergistic Catalysis, and Pollutant Emissions During the Co-Combustion of Sewage Sludge and Coal Gasification Fine Slag Residual Carbon

ICOPE-15-C140 Effects of Mineral and Coal Ash on Sulfur Transformation in the Coal Staged Conversion Process

An Experimental Study on SO2 Emission and Ash Deposition Characteristics of High Alkali Red Mud under Large Proportional Co-Combustion Conditions in Fluidized Bed

Analysis of the Pyrolysis of Solid Recovered Fuel and Its Sorted Components by using TG-FTIR and DAEM

A Component Synergy of Flue Gas Torrefaction of Municipal Solid Waste

Effect of lignin, cellulose and hemicellulose from biomass on sulfur release behavior from dyeing sludge combustion

Investigation on co-combustion of coal gasification fine slag residual carbon and sawdust char blends: Physiochemical properties, combustion characteristic and kinetic behavior

Green refuse derived fuel preparation and combustion performance from the solid residues to build the zero-waste city

Inhibitory effects of developed composite flame retardant on bituminous combustion and volatile emissions

Catalytic pyrolysis of biogas residues with incineration bottom ash by TG-MS: Kinetics analysis and biochar stability