Abstract:Epoxy resins are one of the first choices for structural adhesives and are widely used in combination with fibers as fiber reinforced plastics (FRP). The mechanical properties are the result of the complex chemical network structure that is generated by the thermally catalyzed cross linking reaction. Numerical simulations on the atomistic length scale are appropriate tools to understand and improve the mechanical properties and its mechanisms of epoxy resins. This leads to the necessity of a model generation procedure that covers the characteristic cross linking mechanisms of epoxy resins and is able to generate a realistic representation of the network structure. Research in the field of Molecular Dynamic based curing kinematics of polymers has led to cross linking procedures that are based on the main chemical curing reaction and can produce models, whose mechanical properties are in agreement with experimental values. Nevertheless an assessment of the realism of these cross linking procedures is difficult, since various complex aspects, such as the influence of the activator molecules or catalyzing chemical reactions may be important, but are hard to characterize. By using the method of in situ near-infrared spectroscopy (NIR) the time and temperature evolution of the reactive groups, epoxy and either amine or anhydrite curing groups, can be measured. It has been shown that this method is well suited for analyzing the curing process and to characterize the fully hardened epoxy resin. Thus NIR measurements of the cross linking kinetics of epoxy resins give a valuable insight in the curing process that can be used to calibrate and assess numerical approaches of the cross linking procedure. A modeling technique for the curing kinematics of epoxy resins is presented, that is able to realistically represent the cross linking mechanism and generate simulation models with characteristics in good agreement with experimentally analyzed cured epoxy resins. This is achieved by calibrating the cross linking parameters and is shown by a comparison of both, the cross linking procedure and the resulting network structure, with experimental results of NIR measurements. The modeling approach is incorporated in the Molecular Dynamic Finite Element Method (MDFEM) framework and implements a step by step molecular network build-up. This allows to perform MDFEM equilibrium iterations during the curing procedure in order to create realistic and well equilibrated simulation models. Furthermore MDFEM simulations of tensile tests are presented to evaluate the influence of the network structure on the elastic mechanical properties. These numerical tests also illustrate the need for accurate models when deriving material properties from atomistic length scale simulations.

Modelling and simulation of adhesive curing processes in bonded piezo metal composites

A Length-Free Phase Field Model for Epoxy Adhesive Materials Based on Modified Drucker–Prager Criterion

Numerical Simulation on Solvent Diffusion during Polymeric Coating Curing Processes

Simulation of self-piercing rivetting processes in fibre reinforced polymers: Material modelling and parameter identification

Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

Experimental determination and modelling of volume shrinkage in curing thermosets

Experimentally calibrated modeling technique for the cross linking mechanism of epoxy resin and its influence on mechanical properties

Modelling of Bond Formation during Overprinting of PEEK Laminates

Analysis of the anisotropic mechanical properties of structural adhesive joints with curing-induced pre-deformations

Numerical analysis of piezoelectric active repair in the presence of frictional contact conditions

Development of mitigation strategies for process-induced deformations through finite elements

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

Modeling of Bonding Piezoelectric Stack Using Conductive Adhesive with Metal-Coated Polymer Fillers

Monitoring of the curing process and thermal failure of Adhesive-Bonded Structures based on damping measurement using quantitative electromechanical impedance

Analyzing Deformation of a Cationic Photopolymerized Epoxy Adhesive during the Curing Process in UV Irradiation and Dark Reaction based on Finite Element Method and Measurement

Characterization and modeling of the polymerization-dependent moisture absorption behavior of an epoxy-carbon fiber-reinforced composite material

A piecewise kinetic model consistent with curing cycle of epoxy/amine composite

Reactive Molecular Dynamics Simulation of Epoxy for the Full Cross-Linking Process

Curing of epoxy adhesives between thin metal foils by means of inductive heating

Characterization and material model definition of toughened adhesives for finite element analysis

Finite strain anisotropic elasto-plastic model for the simulation of the forming and testing of metal/short fiber reinforced polymer clinch joints at room temperature