Abstract:Increasing demands for high-performance screw pumps in oil and gas as well as other applications require deep understanding of the fluid flow field inside the machine. Important effects on the performance such as dynamic losses, influence of the leakage gaps and presence and extent of cavitation are difficult to observe by experiments. However, it is possible to study such effects using well-validated computational fluid dynamics models. The novel-structured numerical mesh consisting of a single-computational domain for moving screw pump rotors was developed to allow three-dimensional computational fluid dynamics simulation of such machine possible. Based on finite volume method, the instantaneous mass flow rates, rotor torque, local pressure field, velocity field and other performance indicators including the indicated power were predicted. A calculation model for the bearing friction losses was introduced to account for mechanical losses. The geometry of the inlet and outlet passages and piping system are taken into consideration to evaluate their influences on the pressure distribution and shaft power. The paper also shows the influence of rotor clearances on the pump performance. The computational fluid dynamics model was validated by comparing the numerical results with the measured performance obtained in the experimental test rig through the comprehensive experiment performed for a set of discharge pressures and rotational speeds. Validation includes comparison of mass flow rates, shaft power and efficiency under variety of speeds and discharge pressure. It has been found that the predicted results match well with the measurements. The results also showed that the radial clearances have larger influence on the mass flow rate than the interlobe clearance. The correct design of the flow passages within the screw pump plays significant role in minimizing required power consumption. The analysis presented in this paper contributes to better understanding of the working process inside the screw pump and offers a good reference to improve design and optimize such machines in terms of clearance selection, shape of the ports, piping system, etc. In future, this model will be used for analysis of cavitating flows and determining performance of other multiphase screw pumps.

Numerical study on unsteady heat transfer and fluid flow in a closed cylinder of reciprocating liquid hydrogen pumps

Numerical Study on the Dynamic Process of Reciprocating Liquid Hydrogen Pumps for Hydrogen Refueling Stations

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Numerical simulation of flow and heat transfer in journal bearing lubrication

Numerical Simulation of the Flow Ripples Considering Fluid Compressibility in Axial Piston Pump

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Churning Losses Analysis on the Thermal-Hydraulic Model of a High-Speed Electro-Hydrostatic Actuator Pump

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

Numerical study on static performance of hydrodynamic bearing in high-speed liquid hydrogen centrifugal pump

Numerical Study of the Hydrodynamics of an External Gear Pump

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Liquid hydrogen centrifugal pump optimization based on reducing hydraulic loss and improving cavitation

Numerical Study On Transverse-Axis Rotary Viscous Pump And Hydropulser Mechanism

Unsteady internal flow characteristics study of a hydrogen circulation pump under different pressure differential conditions

Numerical Study of Heat Transfer and Fluid Flow Characteristics of a Hydrogen Pulsating Heat Pipe with Medium Filling Ratio

Numerical study of a liquid-piston compressor system for hydrogen applications

Analysis of internal flow characteristics in hydrogen circulation pump with variable trochoid ratio profile

Performance Simulation on a New Type of Liquid Pump

Numerical and experimental analysis of the cavitation and flow characteristics in liquid nitrogen submersible pump

Numerical modelling of twin-screw pumps based on computational fluid dynamics