Abstract:Sodium loss at the anode in the initial sodiation process significantly reduces the energy density of sodium-ion batteries (SIBs). Here, a high-capacity Na2S/C nanocomposite featuring ultrafine Na2S nanoclusters (<2 nm) confined in ZIF-8-derived microporous N-doped carbon is fabricated and employed as a cathode presodiation reagent to compensate for this sodium loss and increase the energy density of SIBs. The ultrafine size of Na2S enables fast reaction kinetics for sodium extraction and the carbon matrix provides good electronic conductivity. Also, the overall particle size of the Na2S/C nanocomposite (∼40 nm) is close to that of conductive additive. The above features enable it to replace a partial amount of conductive additive and compensate for the sodium loss at the anode concurrently. As a demonstration, the Na3V2(PO4)3 electrode with 5 wt % Na2S/C and 5 wt % carbon black was fabricated, and it displayed a 19 mAh g–1 higher initial charge specific capacity than that of the counterpart with 10% carbon black without the addition of Na2S/C, realizing an increased energy density from 178 to 263 Wh kg–1 in the full cell configuration pairing with a hard carbon anode. Moreover, a stable cycling performance up to 200 cycles with an average capacity loss of 0.024 mAh g–1 per cycle was achieved for the presodiated Na3V2(PO4)3 electrode.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05144?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05144</a>.Additional TEM, HAADF-STEM, and the corresponding elemental mapping images; additional XRD results; charge/discharge profiles and cycling performances for hard carbon anodes and full cells; Nyquist plots of the NVPO electrodes at different cycles; and additional SEM images (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05144/suppl_file/am1c05144_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Green Fabrication of Amorphous FePO 4 /Carbon Nanotube Electrodes via Electrophoretic Deposition for Sodium-Ion Batteries

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Synthesis of FeS/Fe2O3 hollow fibers derived from Fe-alginate fibers as anodes for high performance sodium-ion batteries

A Scalable Approach to Na 2 FeP 2 O 7 @Carbon/Expanded Graphite as a Low‐Cost and High‐Performance Cathode for Sodium‐Ion Batteries

In-situ synthesis of FeS/N, S co-doped carbon composite with electrolyte-electrode synergy for rapid sodium storage

Nano FeSb 2 S 4 Anchored on Exfoliated Graphite for Sodium-Ion Battery Anode via a Two-Step Fabrication

MOF‐Derived Fe 7 S 8 Nanoparticles/N‐Doped Carbon Nanofibers as an Ultra‐Stable Anode for Sodium‐Ion Batteries

MnO 2 Nanosheets on a Carbon Nanofiber Freestanding Film by Electrospinning and In Situ Spraying for Lithium and Sodium Storage

Constructing FeS 2 /TiO 2 p-n heterostructure encapsulated in one-dimensional carbon nanofibers for achieving highly stable sodium-ion battery

Scalable synthesis of mesoporous FeS2 nanorods as high-performance anode materials for sodium-ion batteries

Facile fabrication of the hybrid of amorphous FePO4·2H2O and GO toward high performance sodium-ion batteries

Facile Construction of High-Performance Amorphous FePO4/Carbon Nanomaterials As Cathodes of Lithium-Ion Batteries

The morphology and electrochemical properties of porous Fe2O3@C and FeS@C nanofibers as stable and high-capacity anodes for lithium and sodium storage

Structure adapting of bulk FeS2 micron particles and the corresponding anode for high performance sodium-ion batteries

Enhanced High-Rate Capability and Long Cycle Stability of FeS@NCG Nanofibers for Sodium-Ion Battery Anodes.

Electrodeposited Carbon@fe2o3 Composites As Binder-Free Anodes for Lithium Ion Batteries

Amorphous Iron Phosphate/carbonized Polyaniline Nanorods Composite As Cathode Material in Sodium-Ion Batteries

Encapsulating Highly Crystallized Mesoporous Fe3O4 in Hollow N-doped Carbon Nanospheres for High-Capacity Long-Life Sodium-Ion Batteries

Synthesis of FeS-impregnated heteroatom-doped carbon nanofibers assisted by one-step vulcanization for superior sodium storage

Highly dispersed FeSe2 nanoparticles in porous carbon nanofibers as advanced anodes for sodium and potassium ion batteries

Ultrafine Sodium Sulfide Clusters Confined in Carbon Nano-polyhedrons as High-Efficiency Presodiation Reagents for Sodium-Ion Batteries