Abstract:Chromium is widely presented in industrial solid wastes like tannery sludge, electroplating sludge and metallurgical slag. These industrial solid wastes usually undergo thermal treatment process to reduce volume and toxicity. However, a significant amount of low-toxicity and low-mobility Cr(III) is determined to be oxidized to highly-toxic and highly-mobile Cr(VI) at high temperature, posing a greater threat to humans and the ecological environment. This paper summarizes the forms of Cr in solid wastes containing Cr, redox reactions mechanisms for different Cr forms, and methods to inhibit Cr(VI) formation during thermal treatment process. The Cr(III) compounds in solid waste containing Cr mainly include Cr(III) hydrates, Cr(III) oxides, Cr(III) hosting spinels and Organic-Cr(III). Cr(III) hydrates are usually oxidized at temperatures above 100 °C, even without the induction of alkali and alkaline earth metals. Compared to the direct reaction of Cr(III) oxides and spinels with O 2 , Cr(III) can be induced to oxidize at lower temperatures by alkali and alkaline earth metals. A large amount of Cr(III) is oxidized usually at 600–900 °C. Organic-Cr is generally pyrolyzed to CrO 3(g) , CrO 2 Cl (g) and Cr 2 O 3(s) at high temperature. CrO 2 Cl (g) can be released directly into the atmosphere with CrO 3(g) , or captured by CaO to form CaCrO 4 . The reduction of Cr(VI) at high temperatures includes the decomposition of unstable Cr(VI) compounds driven solely by temperature, as well as reduction facilitated by acidic oxides. The reduction of Cr(VI) at high temperatures involves the decomposition of unstable Cr(VI) compounds, driven solely by temperature, as well as reduction facilitated by acidic oxides. Typical unstable Cr(VI) compounds include CrO 3 and CaCrO 4 , which begin to decompose at temperatures above 270 °C and 1000 °C, respectively. Cr(III) oxidation and Cr(VI) reduction at high temperature are strongly dependent on the system basicity and the temperature. Subsequently, reducing oxygen content in atmosphere and the system basicity by adding common acidic oxides such as silicon dioxide, phosphate and sulfates exhibited a significant effect on inhibiting Cr(VI) formation during heating solid waste containing Cr. However, Cr oxidation and reduction mechanisms at molecular level have not yet been explored, and more effective measures to inhibit Cr(III) oxidation during thermal treatment of solid waste also should be developed in further works.

Reactive Condensation of Cr Vapor on Aluminosilicates Containing Alkaline Oxides

Influence of Water Concentration on High-Temperature Reactive Condensation of Chromium Vapors Generated in 800°C Air

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Inhibition of Cr6+ by the formation of in-situ Cr3+ containing solid-solution in Al2O3–CaO–Cr2O3–SiO2 system

Chromium Reaction Mechanisms for Speciation using Synchrotron in-Situ High-Temperature X-ray Diffraction

Atomic layer deposition of chromium oxide—An interplay between deposition and etching

High-Temperature Chemical Stability of Cr(III) Oxide Refractories in the Presence of Calcium Aluminate Cement

Can Cr(III) Substitute for Al(III) in the Structure of Boehmite

Effects of Alkali on Water Soluble Hexavalent Chromium in Ordinary Portland Cement

Kinetic Study and Catalytic Activity of Cr3+ Catalyst Supported on Calcium Silicate Hydrates for VOC Oxidation

Effect of oxide interactions on chromium speciation transformation during simulated municipal solid waste incineration

High-temperature stability and leaching kinetics of the hexavalent chromium compound, chrome-hauyne (Ca4Al6CrO16)

Aerosol Behavior in Chromium Waste Incineration

Understanding of leaching, immobilization and oxidation behaviors of chromium in Cr 2 O 3 -doped aluminosilicate glasses

Reaction of a Molten Cr-Si-Base Alloy with Ceramics and a High Entropy Oxide

Recent advances toward chromium oxidation and reduction reaction mechanisms during thermal treatment of solid waste: A critical review

Inhibition of Cr6+ in calcium aluminate cement bonded refractory castables using chrome-hibonite, Ca(Al,Cr)12O19 raw materials

Chromium-doped silica optical fibres : influence of the core composition on the Cr oxidation states and crystal field

The Effect of Chromium on the Gamma to Alpha Phase Transition of Alumina Coating Formed on 316L SS by a Cathodic Micro Arc Deposition (CMAD) Process

Formation Mechanisms and Leachability of Hexavalent Chromium in Cr2O3-Containing Refractory Castables of Electric Arc Furnace Cover

Chromium Depletion in a Ni-30Cr Alloy During High-Temperature Oxidation