Abstract:A key requirement by the European CCS directive for the safe operation of geological CO2 storage is the operator's responsibility to demonstrate containment of the injected CO2 and conformance between its actual and modelled behavior. Understanding the subsurface behavior and long-term fate of the injected CO2 requires the quantification of key reservoir parameters (e.g. pore pressure, CO2 saturation and strain in the overburden). Reliable quantification of these parameters and distinction between them pose a challenge for conventional monitoring techniques, which could be overcome by combining advanced multi-disciplinary and multi-method monitoring techniques in a joint inversion.Within the aCQurate project, we aim to develop a new technology for accurate CO2 monitoring using Quantitative joint inversion for large-scale on-shore and off-shore storage applications. In previous applications of joint inversion to CO2 monitoring, we successfully combined the strengths and advantages of different geophysical monitoring techniques (i.e. seismics with its high spatial resolution and geoelectrics with its high sensitivity to changes in CO2 saturation), using a cross-gradient approach to achieve structural similarity between the different models. While this structural joint inversion provides a robust link between models of different geophysical monitoring techniques, it lacks a quantitative calibration of the model parameters based on valid rock-physics models. This limitation is addressed by extending the previously developed structural joint inversion method into a hybrid structural-petrophysical joint inversion, which allows integration of cross-property relations, e.g. derived from well logs.The hybrid structural-petrophysical joint inversion integrates relevant geophysical monitoring techniques in a modular way, including seismic, electric and potential field methods (FWI, CSEM, ERT, MMR and gravity). It is implemented using a Bayes formulation, which allows proper weighting of the different models and data sets, as well as the relevant structural and petrophysical joint inversion constraints during the joint inversion.The hybrid joint inversion is designed for on-shore and off-shore CO2 storage applications and will be demonstrated using synthetic data from the CaMI Field Research Station (CaMI.FRS) in Canada. CaMI.FRS is operated by the Containment and Monitoring Institute (CaMI) of CMC Research Institutes, Inc., and provides an ideal platform for the development and deployment of advanced CO2 monitoring technologies. CO2 injection occurs at 300 m depth into the Basal Belly River sandstone formation, which is monitored using a large variety of geophysical and geochemical monitoring techniques. In preparation for the application to real monitoring data, we present the application of the joint inversion to synthetic full waveform inversion (FWI) and electrical resistivity tomography (ERT) data, derived for a geostatic model with dynamic fluid flow simulations.In addition to obtaining a better understanding of the subsurface behavior of the injected CO2 at CaMI.FRS, our goal is to mature the joint inversion technology further towards large-scale CO2 storage applications, e.g. on the Norwegian Continental Shelf.AcknowledgementsFunding is provided by the Norwegian CLIMIT program (project number 616067), Equinor ASA, CMC Research Institutes, Inc., University of Calgary, Lawrence Berkeley National Laboratory (LBNL), Institut national de la recherche scientifique (INRS), Quad Geometrics Norway AS and GFZ German Research Centre For Geosciences (GFZ).

Geological modeling and simulation of CO2 injection in the Johansen formation

A Feasibility Study of CO2geologic Sequestration Integrating Reservoir Simulation, Rock-Physics Theory, and Seismic Modeling

Multiresolution Coupled Vertical Equilibrium Model for Fast Flexible Simulation of CO$_2$ Storage

Modelling CO2-induced fluid–rock interactions in the Altensalzwedel gas reservoir. Part I: from experimental data to a reference geochemical model

CO2 flow modeling in a coupled wellbore and aquifer system: Details of pressure, temperature, and dry-out

Quantitative CO2 monitoring at the CaMI Field Research Station (CaMI.FRS), Canada, using a hybrid structural-petrophysical joint inversion

Modelling geological CO 2 leakage: Integrating fracture permeability and fault zone outcrop analysis

Direct comparison of numerical simulations and experiments of CO$_2$ injection and migration in geologic media: Value of local data and predictability

Integrated Approach to Reservoir Simulations for Evaluating Pilot CO2 Injection in a Depleted Naturally Fractured Oil Field On-Shore Europe

Three‐Axis Borehole Gravity Monitoring For Co2 Storage Using Machine Learning Coupled To Fluid Flow Simulator

2D parallel simulation of seismic wave propagation in poroelastic media to monitor a CO2 geological sequestration process

Simulation of bench-scale CO2 injection using a coupled continuum-discrete approach

Gas injection and leakage in layered aquifers

Geomechanical Modelling Application to Support Reservoir Selection for Carbon Dioxide Utilization and Storage

Copula modeling and uncertainty propagation in field-scale simulation of CO$_2$ fault leakage

Simulation of CO2 hydrate formation in cold aquifers: nonequilibrium approach

A field laboratory for monitoring CO2 leakage

Investigations in Geologic Carbon Sequestration: Multiphase Flow of CO 2 and Water in Reservoir Rocks

Co2 Geological Sequestration Modelling And Injection Induced Fracturing Analysis Of The Caprock

Reservoir Scale Porosity-Permeability Evolution in Sandstone Due to CO2 Geological Storage

CO2 storage in deep saline aquifers: evaluation of geomechanical risks using integrated modeling workflow