Abstract:Understanding the multiphase flow properties of CO2 and water in porous media is essential for successful large-scale geologic CO2 storage. Optimizing the design and operation of injection projects will depend on knowledge of injectivity, trapping capacity, distribution of CO2 in the subsurface and overall areal extent of the subsurface plume. It is increasingly recognized that the capillarity, capillary heterogeneity, and accurate relative permeability curves of CO2-water systems are essential for accurate simulations ranging from the sub-core to the basin scale. Our research program aims at improving the fundamental understanding on the dynamics of multiphase flow of CO2 and brine in porous media. The research work integrates experimental investigations and numerical simulations, thus allowing for a direct link between observations in the lab and the physics of the multiphase displacement process. In this context, current available models can be validated and/or extended so as to include a more accurate description of the physical processes involved. Highlights of this year’s effort include the following: • Publication of a new method for simultaneously measuring capillary pressure and relative permeability at pressures and temperatures representative of geological storage reservoirs. This method addresses many unresolved issues about the influence of factors such as interfacial tension and wettability on gas/brine relative permeability permeability curves (Pini et. al., 2013, Water Resources Research). • Publication of a robust method for making sub-core permeability maps using multiphase displacement data and CT-scanning. This method has been demonstrated to accurately predict CO2 saturation distributions in spatially heterogeneous rocks over a wide range of flowrates and for different fluid pairs (Krause et al, 2013, Transport in Porous Media). • An analytical solution for predicting the average CO2 saturation in core floods as a function of capillary and gravity numbers has been developed and published. This solution accurately accounts for buoyancy and capillary in 2 dimensional flow systems (Kuo and Benson, 2012, Society of Petroleum Engineers Journal). • A paper has been accepted for publication that documents the influence of capillary entry pressure on the rate of solubility trapping. In particular, this paper shows that depending on the nature of the capillary pressure curve and how it is treated in the numerical simulator; solubility trapping can be significantly over or underestimated (Li et al., 2013, Journal of Greenhouse Gas Control). • Micromodel investigations of exsolution of CO2 due to depressurization confirm our hypothesis that the low mobility to water and CO2 is caused the formation of a disconnected phase of exsolved CO2 bubbles. This observation is the basis for the development of a new concept for exsolution enhanced oil recovery (Zuo et al., 2013, Advances in Water Resources; Zuo and Benson, 2013, Energy Procedia, 11 International Conference on Greenhouse Gas Technology). • Significant progress has been made to develop improved approaches for simulating flow of CO2 and brine in systems with strong capillary heterogeneity—such as is expected for many typical sequestration sites.

Simulation of CO2 hydrate formation in cold aquifers: nonequilibrium approach

Multiresolution Coupled Vertical Equilibrium Model for Fast Flexible Simulation of CO$_2$ Storage

CO2 Storage Behavior Via Forming Hydrate from N2/CO2 Gas Mixtures in the Presence of Initial SI CO2 Hydrate Seeds

Effective Constitutive Relations for Simulating CO2 Capillary Trapping in Heterogeneous Reservoirs with Fluvial Sedimentary Architecture

Development of a Permeability Reduction Model Using Deep Learning for CO2 Hydrate Storage

CO2 storage in carbonate rocks: An experimental and geochemical modeling study

Dissolution Trapping of Carbon Dioxide in Heterogeneous Aquifers

Multiscale Numerical Simulation of CO2 Hydrate Storage Using Machine Learning

Reservoir Scale Porosity-Permeability Evolution in Sandstone Due to CO2 Geological Storage

CO2 flow modeling in a coupled wellbore and aquifer system: Details of pressure, temperature, and dry-out

Molecular Dynamics of Carbon Sequestration via Forming CO 2 Hydrate in a Marine Environment

Modelling CO2-induced fluid–rock interactions in the Altensalzwedel gas reservoir. Part I: from experimental data to a reference geochemical model

Hydrate management strategies for CO 2 injection into depleted gas reservoirs

A Coupled Hydrate and Compositional Wellbore Simulator: Understanding Hydrate Inhibition from Associated Brines in Oil and Gas Production

Molecular Dynamics of Carbon Sequestration Via Forming CO2 Hydrate in a Marine Environment

Three-dimensional Modeling of the Reactive Transport of CO 2 and Its Impact on Geomechanical Properties of Reservoir Rocks and Seals

Large-Scale Experimental Investigation of Hydrate-Based Carbon Dioxide Sequestration

Investigations in Geologic Carbon Sequestration: Multiphase Flow of CO 2 and Water in Reservoir Rocks

Molecular simulation of imperfect structure I CO2 hydrate growth in brine

Simulations of CO2 Dissolution in Porous Media Using the Volume-of-Fluid Method

Non-isothermal, multi-phase, multi-component flows through deformable methane hydrate reservoirs