Abstract:Adding CaO during oily sludge (OS) incineration is viewed as an efficient approach to treat high-sulfur-containing OS on a large scale. It can effectively reduce the content of SO<sub>2</sub> and affect the migration and transformation of heavy metals. To explore the effect of CaO on the migration characteristics of As, Pb, and Ni during OS incineration, incineration experiments of OS with and without CaO were carried out respectively in a horizontal tube furnace at temperatures ranging from 800 to 1000 °C. The total amount and leachability of As, Pb, and Ni in samples were presented in this paper. The results showed that the migration characteristics of As, Pb, and Ni during OS incineration were affected by incineration temperature and CaO. As temperature increases, the residue ratios of As and Pb in bottom ash decreased, but Ni increased first and then decreased. CaO played an important role in promoting the residue of As and Pb in bottom ash. Moreover, when adding CaO, the leachability of As and Pb in bottom ash was significantly reduced. The results will supply essential data and theoretical support for the innocuous treatment of OS.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02844?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02844</a>.Experimental instruments and equipment description (Table S1); experimental reagent information (Table S2); pollutant concentration limits of sludge products (Table S3); residue ratios of As, Pb, and Ni in samples (Table S4); leaching ratios of As, Pb, and Ni in samples (Table S5); curing ratios of As, Pb, and Ni in samples (Table S6); control limit of hazardous waste entering landfill area (Table S7); element contents of samples (Table S8); heavy-metal total amount analysis experiment results (Figure S1); toxic leaching experiment results (Figure S2); and EDS analysis of samples (Figure S3) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02844/suppl_file/ef0c02844_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Migration and transformation of phosphorus and toxic metals during sludge incineration with Ca additives

Mechanism of Na2O/CaO Ratio Affecting Ash Fusing Characteristics During Ash Deposition and Slagging in Municipal Solid Waste Incinerator

Study on the Migration Characteristics of As, Pb, and Ni during Oily Sludge Incineration with CaO Additive

Transformation of phosphorus by MgCl2 and CaCl2 during sewage sludge incineration

Efficient recovery of phosphorus in sewage sludge through hydroxylapatite enhancement formation aided by calcium-based additives

Effect of CaO and montmorillonite additive on heavy metals behavior and environmental risk during sludge combustion

Effects of Added Calcium-Based Additives on Swine Manure Derived Biochar Characteristics and Heavy Metals Immobilization

Bioavailability transition path of phosphorus species during the sewage sludge incineration process

An integrated experimental and theoretical study on Si/Al-based and Ca-based additives for immobilizing heavy metals during pyrolysis of high-organic solid waste

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Study on migration characteristics of heavy metals during the oil sludge incineration with CaO additive

Co-pyrolysis of sewage sludge with polyvinyl chloride (PVC)/CaO: Effects on heavy metals behavior and ecological risk

Reduction of heavy metal emissions by adding modified attapulgite to sludge in bubbling fluidized bed incineration process

Enhanced transformation of phosphorus (P) in sewage sludge to hydroxyapatite via hydrothermal carbonization and calcium-based additive

Influence of microwave-assisted pyrolysis parameters and additives on phosphorus speciation and transformation in phosphorus-enriched biochar derived from municipal sewage sludge

Effects of phosphorous-based additive on flow properties of high silicon-aluminum coal ash

Preparation of phosphorus containing products by co-incineration of sludge ash and calcium-based additives: Focusing one-step and multi-step method

Targeting Phosphorus Transformation to Hydroxyapatite Through Sewage Sludge Pyrolysis Boosted by Quicklime Toward Phosphorus Fertilizer Alternative with Toxic Metals Compromised

Optimal metal immobilization of oxygen-enriched co-combustion of Zn/Cd hyperaccumulator and textile dyeing sludge with natural or modified kaolin

Effects of copyrolysis of sludge with calcium carbonate and calcium hydrogen phosphate on chemical stability of carbon and release of toxic elements in the resultant biochars

Effect of Calcium-Based Sorbents on the Reduction of Chlorinated Contaminants During Municipal Solid Waste Thermal Treatment.