Abstract:Microbial desalination cell (MDC) was considered inefficient to desalinate salt water with low salt concentration, therefore, the feasibility of using capacitive deionization (CDT) and membrane capacitive deionization (MCDI) as a post-processing technologies for MDC was investigated in this study, as well as the possibility of using MDC as the power supply for CDI and MCDI. The internal resistances of MDC with different salt concentration, the desalination rate and fresh water yield during a typical desalination cycle under initial salt concentration of 35 g/L were investigated in order to find out the deadline salt concentration for the MDC to desalinate effectively. The internal resistance increased from 21.7 to 602 Omega as the concentration of salt water decreased from 35 g/L to 0.1g/L. The salt water volume increased from 42 to 48 ml when the salt concentration decreased from 35 to 15 g/L, then decreased to 38 ml at the end of one desalination cycle when the salt concentration achieved 0.05 g/L due to the salt gradient (osmotic pressure). The maximum desalination rate during one typical desalination cycle in our experiment reached 5.65 mg/h when salt concentration decreased from 27.26 to 26.32 g/L, while the minimum desalination rate was 0.534 mg/h when salt concentration decreased from 0.38 to 0.05 g/L. It was concluded that MDC was not suitable to desalinate salt water with salt concentration less than 1 g/L. When CDI and MCDI were used as the post-processing technologies for MDC, a better performance in term of electrosorption capacity was obtained from MCDI with an influent salt concentration of 1 g/L. The experimental result also showed that the electrosorption capacity of MCDI with MDC as power supply was more than that with potentiostat as power supply at 0.8V, this suggests that MDC could be an alternative power supply for MCDI.

Efficient transport system of cultivated mushroom mycelium enables its derived carbon with high performance electrochemical desalination capability

PmPD@Fungi-derived monolithic carbon sponge as a high-capacity carbon electrode for desalination in flow-through capacitive deionization

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Strong Interface Coupling Boosting Hierarchical Bismuth Embedded Carbon Hybrid for High-Performance Capacitive Deionization

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

MnO 2 -modified soybean root derived porous carbon with excellent capacity deionization

Capacitive deionization coupled with microbial fuel cells to desalinate low-concentration salt water.

Improving desalination by coupling membrane capacitive deionization with microbial desalination cell

Electrocapacitive desalination with nitrogen-doped hierarchically structured carbon prepared using a sustainable salt-template method

Hierarchical Porous Carbons Derived from Porous Biomass for High-Performance Capacitive Deionization

Walnut shell-derived porous carbon with MgSO 4 modification for high-performance capacitive deionization

Enhanced Construction of 3D Carbon Skeleton Through Molten Salt Coupling Activation Effect for High Efficiency Capacitive Deionization of Lead (II) Ions Removal in Wastewater

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Selective electrosorption of heavy metal ions from wastewater with S-doped hierarchical porous carbon derived from waste Camellia oleifera shell

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

3D printed electrodes for efficient membrane capacitive deionization

Microbial desalination cell combined with capacitive deionization/membrane capacitive deionization to desalinate seawater