Abstract:An efficient production process that can selectively recover the critical element germanium (Ge) from dilute sources is necessary to address the criticality of Ge. In this study, functionalized polystyrenic beads with catechol (A-Cat), nitro-catechol (A-Cat-N), and pyrogallol (A-Py) were used in a fixed-bed column to recover Ge and the Ge selectivity in the presence of competing ions, the effect of flow rate and inlet concentration, breakthrough modeling, and regeneration and reuse were investigated. Additionally, the synthesized adsorbent A-Cat was compared with commercially available N-methylglucamine resin for recovering Ge from synthetic Zn refinery residues solution. All three adsorbents showed Ge adsorption (>25 mg/g) and good desorption in single-element solution. The adsorbents were selective for Ge(IV) in a multiple-element solution containing 15 elements, and concentrated Ge solution was obtained with A-Cat after elution. The Modified Dose-Response model best explained the breakthrough curve compared to the Thomas and Yoon-Nelson model. Lower flow rates and higher inflow concentration both resulted in higher Thomas adsorption capacity (30 mg/g at 9 bed volumes per hour (BVH) and 62.8 mg/g at 80 mg/L C o ). The adsorbent A-Cat showed great regeneration while retaining >70 % capacity at the end of 5 adsorption–desorption cycles. A-Cat was also selective for Ge in synthetic Zn refinery residue solution containing 10 times Fe and 20 times Cu and Zn. Commercial N-methylglucamine resin showed low selectivity for Ge and reached saturation at very low bed volumes (BV) (<10BV). The current work shows that the A-Cat can be used for industrial applications to recover Ge selectively. A Linear Free Energy Relationship (LFER) was used to estimate log K ML, followed by aqueous complexation modeling. The modeling showed the Ge(IV) selectivity but underestimated the extent of ion complexations, indicating that the apparent stability constants for grafted ligands are higher than solution log K ML .

Cross-linked amidoxime porous resin for selective gallium separation in Bayer solutions: Reaction mechanism and kinetic study

A hydrazine amidoxime crosslinked polyacrylonitrile resin for efficient extraction of gallium from vanadium-containing waste solution

Enhanced adsorption and separation of gallium using silica-based P507-TBP/SiO2–P adsorbent from sulfuric acid solution

The Effective Separation of Gallium, Vanadium, and Aluminum from a Simulated Bayer Solution by Resin Exchange

Uniform macroporous amidoximated polyacrylonitrile monoliths for gallium recovery from Bayer liquor

Evaluation of Functionalized Amberlite Type XAD7 Polymeric Resin with L-Valine Amino Acid Performance for Gallium Recovery

Preparation of a gallium-imprinted resin-capacitive deionization electrode and study of its gallium adsorption performance

Fabrication of peptide-encapsulated sodium alginate hydrogel for selective gallium adsorption

Highly selective capture of gallium from aqueous solutions using tetradentate amidoxime functionalized MIL-53(Al) nanofiber membranes

Conductive biomass carbon aerogel with high adsorption performance for gallium in alkaline solution

Recovery of gallium by silica‐based polymer TBP / SiO 2 ‐P obtained from hydrochloric acid solution

Preparation of 4-Amino-3-hydrazino-1,2,4-triazol-5-thiol-Modified Graphene Oxide and Its Greatly Enhanced Selective Adsorption of Gallium in Aqueous Solution

Fixed-bed column adsorption of Ge(IV) using catechol-based adsorbents and aqueous complexation modeling to understand Ge(IV) selectivity

A green synthesis method of a mussel-inspired polyphenol-functionalized silica-based material and its highly efficient adsorption of gallium

Efficient removal of Cu(II), Pb(II), Cr(VI) and As(V) from aqueous solution using an aminated resin prepared by surface-initiated atom transfer radical polymerization

Preparation and adsorption performance of a novel bipolar PS-EDTA resin in aqueous phase

Sorption Extraction of Gallium from Alumina-Alkaline Solutions

Recovery of Gallium from Bauxite Residue Using Combined Oxalic Acid Leaching with Adsorption onto Zeolite HY

Efficient recovery of gallium(III) from alkaline solution by electrosorption using biomass-derived carbon aerogel electrodes

Graphene Oxide Covalently Functionalized with 5-Methyl-1,3,4-thiadiazol-2-amine for pH-Sensitive Ga3+ Recovery in Aqueous Solutions

Adsorption of Tannic and Gallic Acids on A New Polymeric Adsorbent and the Effect of Cu(Ii) on Their Removal