Abstract:Integrating Faradaic (charge transfer) materials with carbon has been proven extensively to be a valid strategy to prepare highly efficient electrodes for electrochemical desalination or removal of heavy metal ions from wastewater via a capacitive deionization (CDI) platform. However, the influences of preliminary functionalization of the carbon component (e.g., nitrogen doping, hydroxyl grafting) and pairing of cathodes and anodes on the desalination performance have yet to be thoughtfully explored. Herein, we prepared a group of MnO2-decorated mesoporous carbon composites with nitrogen as a dopant (i.e., MK-NMCS, K-NMCS, NMCS, and CS), and systematically evaluated the desalination performance of various cathode//anode pairs in a hybrid capacitive deionization (HCDI) for capturing Na+, Cu2+, and Pb2+, respectively. Of all electrodes, the MK-NMCS//K-NMCS pair demonstrates the optimum desalination performance based on salt adsorption capacity (SAC) and cycling stability, offering a SAC of 25.4 mg g−1 and a SAC retention of 102.4% after 50 consecutive charge-discharge cycles at 1.2 V in 500 ppm NaCl solution. In addition, the MK-NMCS//K-NMCS electrodes also show the maximum ion adsorption capacity (IAC) toward Cu2+ and Pb2+ ions compared to other cathode//anode pairs, attaining an IAC of 37.0 and 30.0 mg Cu2+ per gram electrode materials at 1.2 V in 500 and 200 ppm Cu2+ solutions, respectively (cf. 32.2 mg Pb2+ per gram electrode materials in 200 ppm Pb2+ solution). Besides, these electrodes exhibit excellent cycling stability when applied in removing each heavy metal ion separately, with an IAC retention of 90.0% and 98.5% after 50 cycles toward Cu2+ and Pb2+ ions, respectively. Mechanical analysis reveals that both heavy metals are likely to be sequestered via capacitive electrosorption by carbon, intercalation with the MnO2, and surface complexation at the external surface of the [MnO6] octahedral layers. These findings underscore the pivotal roles of pre-functionalization of the original carbon and pairing of cathodes and anodes in the configuration of HCDI cells with improved performance and provide valuable insight into the optimization of Faradaic/carbon composite electrodes for remediation of wastewater with heavy metals via CDI platforms.

In-situ construction of 3D hierarchical MoS2/CoS2@TiO2 nanotube hybrid electrodes with superior capacitive performance toward water treatment

Carbon-embedded hierarchical and dual-anion C@MoSP heterostructure for efficient capacitive deionization of saline water

Synthesis of novel 2D/2D Ti3C2Tx MXene / 1T-MoS2 heterostructure enhanced with carbon nanotubes as a highly-efficient electrode for hybrid capacitive deionization

Well-dispersed few-layered MoS2 connected with robust 3D conductive architecture for rapid capacitive deionization process and its specific ion selectivity

Novel MoS2/NOMC Electrodes with Enhanced Capacitive Deionization Performances

Capacitive Deionization with MoS2/g-C3N4 Electrodes

Electrostatically induced reconstruction of 3D nitrogen-doped Ti3C2Tx electrode and its excellent desalination performance for hybrid capacitive deionization

Designed Fabrication of Hierarchical Porous Carbon Nanotubes/graphene/carbon Nanofibers Composites with Enhanced Capacitive Desalination Properties

Synergistic effect of intercalation and EDLC electrosorption of 2D/3D interconnected architectures to boost capacitive deionization for water desalination via MoSe2/mesoporous carbon hollow spheres

Ti3C2‐MXene Partially Derived Hierarchical 1D/2D TiO2/Ti3C2 Heterostructure Electrode for High‐Performance Capacitive Deionization

Free-standing 3D alkalized Ti3C2Tx/Ti3C2Tx nanosheet membrane electrode for highly efficient and stable desalination in hybrid capacitive deionization

MnO2 decorated N-doped mesoporous carbon electrodes boost enhanced removal of Cu2+ and Pb2+ ions from wastewater via a hybrid capacitive deionization platform

Confinement and phase engineering boosting 1T phase MoS2/carbon hybrid for high‐performance capacitive deionization

Ferroferric oxide@titanium carbide MXene heterostructure with enhanced sodium storage ability for efficient hybrid capacitive deionization

Enhanced Capacitive Deionization Properties of Activated Carbon Doped with Carbon Nanotube-Bridged Molybdenum Disulfide

Manganese doping strategy for enhanced capacitive deionization performance of MoS 2

Preparation of nitrogen-doped hierarchical porous carbon electrodes for high performance capacitive deionization

Hierarchical Co3O4/CNT decorated electrospun hollow nanofiber for efficient hybrid capacitive deionization

Developing efficient, binder-free 3D porous Ti3C2Tx-MXene electrodes for enhanced capacitive deionization towards desalination

Flexible ultrathin Nitrogen-Doped carbon mediates the surface charge redistribution of a hierarchical tin disulfide nanoflake electrode for efficient capacitive deionization

Cu-based MOF-derived architecture with Cu/Cu2O nanospheres anchored on porous carbon nanosheets for efficient capacitive deionization