Abstract:The catalytic hydrogenation of dicyclopentadiene (DCPD) is one of the pivotal processes in the production of green high-energy-density liquid hydrocarbon fuels, jet propellent-10 (JP-10). However, the high dependency of the current catalysts on high temperature and pressure, whether the non-noble (>120 °C, >15 bar) or even the noble catalyst (80 °C, >7.6 bar), leads to enormous energy consumption and technical challenges in environment and sustainable development. Herein, we prepared a carbon layer wrapped Ni nanoparticles/g-C 3 N 4 catalyst (/g-C 3 N 4 ) derived from the in-situ-formed Ni-MOF/g-C 3 N 4 composite. Benefiting from the 53.2 wt% small-sized Ni nanoparticles and nanosheet structure, resulting in high-density accessible active sites (5.38 × 10 20 sites g −1 ) and the mass transfer enhancement, /g-C 3 N 4 achieved DCPD hydrogenation under ambient conditions. > 99.9 % DCPD conversion and 98.1 % endo -tetrahydrodicyclopentadiene yield was obtained at 30 °C, 1 bar, significantly outperforming the benchmark 5 % Pd/C. To the best of our knowledge, it's the mildest condition for DCPD hydrogenation. Further, comprehensive mechanistic insights were gained from combining means of kinetic investigations, in situ characterization, and theoretical calculations. The discrimination result of 27 kinetic models indicated that DCPD hydrogenation followed the Langmuir-Hinshelwood-Haugen-Watson formulism regarding the reaction between the chemisorbed dihydrodicyclopentadiene (DHDCPD) and dissociatively adsorbed hydrogen as the rate-determining step. In-situ DRIFTS confirm that the norbornene ring is preferentially adsorbed and hydrogenated. The DFT calculations further substantiate the hydrogenation pathway. The present work provides guidance for the development of highly efficient non-noble metal catalysts and opens up an environmental-friendly and economically viable avenue for DCPD hydrogenation.

Metal–organic framework-derived Ni-based catalyst for the hydrotreatment of triolein into green diesel

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

In Situ Hydrogenation and Decarboxylation of Oleic Acid into Heptadecane over a Cu–Ni Alloy Catalyst Using Methanol As a Hydrogen Carrier

Catalytic hydrotreatment of triglycerides and various renewable oils into green diesel over metal–organic frameworks derived Ni@C catalyst

Co-based metal-organic frameworks confined N-hydroxyphthalimide for enhancing aerobic desulfurization of diesel fuels

Metal–Organic Framework Nodes Support Single-Site Nickel(II) Hydride Catalysts for the Hydrogenolysis of Aryl Ethers

Ni-Fe-Al LDH derived NiFe nanosheet for green diesel production from lipid hydrotreatment

Frustrated Lewis pair catalyst realizes efficient green diesel production

Metal-Organic Framework-Derived Ni-S/C Catalysts for Selective Alkyne Hydrogenation

Ni-based metal-organic frameworks prepared with terephthalic acid hydroxylation converted methyl palmitate into jet-fuel range hydrocarbons in CO<sub>2</sub> atmosphere

Green Diesel Production Catalyzed by MoNi Catalysts Supported on Rice Husk Biochar

Metal-organic Frameworks-Derived Nitrogen-Doped Carbon Supported Nanostructured PtNi Catalyst for Enhanced Hydrosilylation of 1-Octene

Ni-based metal–organic frameworks prepared with terephthalic acid hydroxylation converted methyl palmitate into jet-fuel range hydrocarbons in CO2 atmosphere

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

Hydrotreating of diesel fuel over in-situ nickel modified Y zeolite supported Ni-Mo-S catalyst

Mineral Montmorillonite Valorization by Developing Ni and Mo-Ni Catalysts for Third-Generation Green Diesel Production

Oxide‐Modified Nickel Photocatalysts for the Production of Hydrocarbons in Visible Light

Low-Temperature Hydrotreatment of C4/C5 Fractions Using a Dual-Metal-Loaded Composite Oxide Catalyst

Coordination-Driven Self-Assembly of Schiff-Base-Tagged Ni–ZrO 2 /N–C Nanocatalysts for Selective Transformation of Renewable Methyl Levulinate

MOF-templated fabrication of Ni@C/g-C 3 N 4 catalyst with high-dense accessible active sites achieving dicyclopentadiene hydrogenation at ambient conditions and comprehensive mechanism insight