Kinetics and mechanistic studies of methane dry reforming over Ca promoted 1Co–1Ce/AC-N catalyst

Yinghui Sun,Guojie Zhang,Haizhu Cheng,Jun Liu,Guoqiang Li
DOI: https://doi.org/10.1016/j.ijhydene.2020.09.192
IF: 7.2
2021-01-01
International Journal of Hydrogen Energy
Abstract:<p>The mechanism and kinetic features of dry reforming with methane (DRM) over Ca promoted 1Co–1Ce/AC-N catalyst was investigated. The mechanistic pathway studies have conducted by FTIR and XPS analysis, structure-activity correlations demonstrated the CH<sub>4</sub> and CO<sub>2</sub> could adsorb on catalyst active sites and generate intermediate CH<sub>x</sub>, OH and CH<sub>x</sub>O, continue to generate CO and H<sub>2</sub> and then desorbed from active sites. Moreover, CH<sub>4</sub> could also oxidized by Ce<sup>4+</sup> and CO<sub>2</sub> reduced by Ce<sup>3+</sup>, the same content of Ce<sup>4+</sup> and Ce<sup>3+</sup> on promoted catalyst greatly improved the reaction rate. The kinetic of dry reforming with methane was examined for temperature between 650 and 850 at 800 °C. The research was carried out by changing the CH<sub>4</sub>/CO<sub>2</sub> ratios between 0.3 and 3.0. The obtained experiment data were fitted by three typical kinetic models (Power Law, Eley-Rideal and Langmuir-Hinshelwood), the fitting results demonstrated that the best prediction of reforming rates can provided by Langmuir-Hinshelwood model for the reaction temperatures between 650 and 800 °C. Moreover, activation energies of methane and carbon dioxide consumption were −117 and −47 kJ/mol, indicating that much higher energy barrier is needed for methane activation compared to carbon dioxide.</p>
energy & fuels,electrochemistry,chemistry, physical
What problem does this paper attempt to address?
This paper aims to explore the kinetic and mechanistic characteristics of the Ca - promoted 1Co - 1Ce/AC - N catalyst in the dry reforming of methane (DRM). Specifically, the research objectives include: 1. **Investigation of the reaction mechanism**: Through FTIR and XPS analysis, the reaction path was studied, and it was determined that CH₄ and CO₂ can be adsorbed on the active sites of the catalyst and generate intermediates CHₓ, OH and CHₓO. These intermediates will continue to generate CO and H₂ and then desorb from the active sites. In addition, Ce⁴⁺ can oxidize CH₄, and Ce³⁺ can reduce CO₂, indicating that Ce species play an important role in the catalytic process. 2. **Kinetic study**: The kinetic characteristics of the dry reforming of methane at different temperatures (650 to 850 °C) and CH₄/CO₂ ratios (0.3 to 3.0) were studied. The experimental data were fitted by three typical kinetic models (power - law model, Eley - Rideal model and Langmuir - Hinshelwood model), and the results showed that the Langmuir - Hinshelwood model had the highest degree of agreement with the experimental data. 3. **Evaluation of adsorption and activation energy**: The adsorption activation energy and total activation energy of different reaction gases were calculated by the Arrhenius equation. The results showed that the adsorption activation energy of CH₄ was 117 kJ/mol, and the adsorption activation energy of CO₂ was 47 kJ/mol, indicating that the activation of CH₄ requires a higher energy barrier. 4. **Optimization of reaction conditions**: The effects of different reaction conditions (such as reaction gas flow rate) on the conversion rates of CH₄ and CO₂ were studied. It was found that when the reaction gas flow rate exceeded 200 mL/min, the conversion rates no longer increased, indicating that the external mass transfer process had a limited impact on the reaction rate. In summary, through detailed experimental and theoretical analysis, this paper systematically studied the reaction mechanism and kinetic characteristics of the Ca - promoted 1Co - 1Ce/AC - N catalyst in the dry reforming of methane, providing an important scientific basis for optimizing this process.