Abstract:Purpose Static inverters are very important for the emergency energy distribution system of aircraft and similar machines. At the same time, the electrical energy produced at high frequency for electrical devices is used to reduce the weight of the cables in the aircraft and spacecraft because of the skin effect. In the high-frequency system, a thinner cable cross-section is used, and a great weight reduction occurs in the aircraft. So, fuel economy, less and late wear of the materials (landing gear, etc.) can be obtained with decreasing weight. This paper aims to present the development of a functional multilevel inverter (FMLI) with fractional sinus pulse width modulation (FSPWM) and a reduced number of switches to provide high-frequency and quality electrical energy conversion. Design/methodology/approach After the production of FSPWM for FMLI with a reduced component, which, to the best of the authors’ knowledge, is presented for the first time in this study, is explained step by step, and eight operating states are given according to different FSPWMs operating the circuit. The designed inverter and modulation technique are compared by testing the conventional modular multilevel inverter on different loads. Findings According to application results, it is seen that there is a 50% reduction in cross-section from 100 Hz to 400 Hz with the skin effect. At 1000 Hz, there is a 90% cross-section reduction. The decrease can be in cable weights that may occur in aircraft from 10 kg to 100 kg according to different frequencies. It causes less harmonic distortion than conventional converters. This supports the safer operation of the system. Compared to the traditional system, the proposed system provides more amplitude in converting the source to alternating voltage and increases the efficiency. Practical implications FSPWM is developed for multilevel inverters with reduced components at the high frequency and cascaded switching studies in the power electronics of aircraft. Social implications Although the proposed system has less current and power loss as mentioned in the previous sections, it contains fewer power elements than conventional inverters that are equivalent for different hardware levels. This not only reduces the cost of the system but also provides ease of maintenance. To reduce the cable load in aircraft and create more efficient working conditions, 400 Hz alternative voltage is used. The proposed system causes less losses and lower harmonic distortions than traditional systems. This will reduce possible malfunctions and contribute to aircraft reliability for passengers and cargo. As technology develops, it is revealed that the proposed inverter system will be more efficient than traditional inverters when devices operating at frequencies higher than 400 Hz are used. With the proposed inverter, safer operation will be ensured, while there will be less energy loss, less fuel consumption and less carbon emissions to the environment. Originality/value The proposed inverter structure shows that it can provide energy transmission for electrical devices in space and aircraft by using the skin effect. It also contains less power elements than the traditional inverters, which are equivalent for different levels of hardware.

Multilevel Aircraft-Inverter Design Based on Wavelet PWM for More Electric Aircraft

Development of a 7.5kva Single-phase Aeronautical Static Inverter

A new high-frequency multilevel inverter effecting cables weight and energy efficiency of aircraft

Development of a Single-phase 6kva Aeronautical Static Inverter

An Advanced Dual-Carrier-Based Multi-Optimized PWM Strategy of Three-Level Neutral-Point-Clamped Converters for More-Electric-Aircraft Applications

A Megawatt-Scale Si/SiC Hybrid Multilevel Inverter for Electric Aircraft Propulsion Applications

Symmetrical Hybrid Multilevel Inverters For Ship Electric Propulsion Drives

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

230 VAC/28 VDC High-Power Density Power Supply for More Electric Aircraft Applications

High Power Integrated Charging System For Electrical Vehicles Based On Winding Multiplexing Of Pmsm

Power control system for lightweight electric aircraft

Dynamic stability analysis of the aircraft electrical power system in the more electric aircraft concept

Hybrid Active PWM Strategy with Dual-Mode Modulation Waves of Three-Level T-type Converter for Aircraft Turboelectric Propulsion Systems

A Power Boosting Method for Wireless Power Transfer Systems Based on a Multilevel Inverter and Dual-Resonant Network

A Novel Interleaved Parallel Bidirectional Dual-Active-Bridge DC–DC Converter With Coupled Inductor for More-Electric Aircraft

An Enhanced Virtual Space Vector Modulation Scheme of Three-Level NPC Converters for More-Electric-Aircraft Applications

Novel Electric Propulsion System Analysis Method for Electric Vertical Takeoff and Landing Aircraft Conceptual Design

An optimized controller for novel asymmetrical 51-level inverter in hybrid solar and wind turbine-connected power system

System-level thermal and electrical modeling of battery systems for electric aircraft design

An Advanced Switching Harmonic Cancellation Method for a Dual-Generator Power System in More-Electric Aircraft

Hybrid Virtual Coordinate-Driven CBPWM Strategy of Three-Level T-type NPC Converters for Electric Aircraft Propulsion Applications