Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

Theoretical study of the interfacial force‐field and thermodynamic properties for HMX‐Estane mixture explosives

Anisotropic Responses and Initial Decomposition of Condensed-Phase Β-Hmx under Shock Loadings Via Molecular Dynamics Simulations in Conjunction with Multiscale Shock Technique.

Ab Initioand Molecular Dynamics Studies of Solid Β-Hmx: Effects of Hydrostatic Pressure and High Temperature

Properties and Phase Transitions of the Solid Β-HMX: Different Force Fields

The first principle studies of the structural and vibrational properties of solid β-HMX under compression

Comparing the Impact Safety Between Two HMX-based PBX with Different Binders

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Friction-induced temperature rise at energetic β -HMX crystal interfaces: Part II. Simulation of HMX rough surface under dry friction conditions

Anisotropic Reaction Properties for Different HMX/HTPB Composites: A Theoretical Study of Shock Decomposition

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

Study on the Crystal Structure and Properties of a New Crystal Form: Ζ-Hmx

Study on Preparation and Performance Test of the Flexible Explosive with Higher Energy, Lower Sensitivity

Multi-aspect and comprehensive atomic insight: the whole process of thermolysis of HMX/Poly-NIMMO-based plastic bonded explosive

Dynamic Responses and Initial Decomposition under Shock Loading: A DFTB Calculation Combined with MSST Method for β-HMX with Molecular Vacancy

Micromechanics-based prediction of thermoelastic properties of high energy materials

Theoretical investigation of vibrational and electronic properties of HMX crystal under uniaxial compression

Computational analysis of mesoscale thermomechanical ignition behavior of impacted LLM-105 based explosives

Preparation and Thermal Stability of Nano-Sized HMX-Based Polymer Bonded Explosives

Synthesis and First Principles Investigation of HMX/NMP Cocrystal Explosive

Visco-hyperelastic constitutive modeling of the dynamic mechanical behavior of HTPB casting explosive and its polymer binder