Abstract:Introduction: The Loess Plateau has long been plagued by cascading loess landslides. The rapid identification of these landslides, along with the accurate determination of their failure modes, is essential for conducting precise disaster assessments in the region. Such assessments are critical for minimizing both human casualties and economic losses. However, the lack of reliable reference data for the early identification of landslide failure modes has resulted in limited detection accuracy, complicating the differentiation between various failure modes. Therefore, investigating the deformation and failure characteristics of loess landslides under different failure modes is crucial for providing a scientific foundation for early hazard detection and the accurate assessment of risk profiles. Methods: This work examines the pre-slip deformation and post-slip damage characteristics of the rotational-sliding Huzhu Landslide and the translational-sliding Zhongzhai Landslide through a combination of field investigations, unmanned aerial vehicle surveys, and remote sensing interpretation. Physical model tests were conducted to simulate the instability and failure processes of both rotational and translational loess landslides. Meanwhile, three-dimensional models and orthophoto graphic images at various stages of the landslides were generated using Contexcapture. Results: The initial stages of rotational sliding landslides are marked by the formation of distinct tensile cracks at the trailing edge of the slope and minor uplift at the front. As the uplift at the front progresses and numerous extension fissures develop, the stability of the landslide reduces progressively. Upon reaching instability, the sliding velocity of the sliding mass initially accelerates before decelerating, with majority of the mass remaining on the sliding surface and retaining relatively well structural integrity. At the trailing edge of the landslide, characteristic features such as falling scarps, fractured walls, and sunken grooves can be observed, while the front displays significant bulging phenomena. In contrast, translational sliding landslides are initially characterized by minor tensile cracks at the trailing edge and pronounced deformation at the front. As these tensile cracks propagate, the landslide are prone to sudden instability under external triggering factors. Following the onset of instability, the sliding mass undergoes rapid movement, with only a small part of the mass remaining on the sliding surface. Discussion: Landslides triggered by different factors and occurring under varying water content conditions may exhibit significant differences in their pre-failure behavior and post-failure characteristics. Thus, it is imperative to conduct further research in this field to better understand these complex dynamics.

Positions of rear scarps in retrogressive shallow soil landslide triggered by water weakening

Experiments and analytical method for landslide scarp caused by water-induced weakening of basal sliding zone

Back-crack locations of water softening-caused retrogressive bedrock–overburden landslides: a case study of Wuhuamiao landslide

Retrogressive failure pattern and retrogression distance in sensitive clays induced by river erosion

Estimating the Rainfall Threshold of a Deep-Seated Landslide by Integrating Models for Predicting the Groundwater Level and Stability Analysis of the Slope

Field measurement and failure forecast during the remediation of a failed cut slope

Assessment for backwater amount in unsaturated zone in landslide in rainfall process

A Rainwater Redistribution Model to Evaluate Two-Layered Slope Stability after A Rainfall Event

Failure Mechanism and Early Warning of an Excavation-Induced Soil Landslide

Dynamical process of the Hongshiyan landslide induced by the 2014 Ludian earthquake and stability evaluation of the back scarp of the remnant slope

A Simplified Numerical Approach for the Prediction of Rainfall-Induced Retrogressive Landslides

Back analysis of shear strength parameters for progressive landslides: case study of the Caifengyan landslide, China

Developing processes of rainfall-induced retrogressive landslide by model experiments

Early identification on failure mode of loess landslide: insight from case study and physical model experiment

Mechanical interpretation of retrogressive failure in mild dip rock slopes induced by slope cutting and rainfall: a case study in Yunnan, China

An Infinite Slope Model Considering Unloading Joints for Spatial Evaluation of Coseismic Landslide Hazards Triggered by a Reverse Seismogenic Fault: A Case Study of the 2013 Lushan Earthquake

Study on mechanism of retrogressive slope failure using artificial rainfall

Geological Analysis and Model Test of Bedding Rock Cutting Landslide

Experimental Study on Deformation and Failure Characteristics of Interbedded Anti-inclined Rock Slopes Induced by Rainfall

Early warning model and model test verification of rainfall-induced shallow landslide

Time-dependent probabilistic evaluation of rainstorm-induced shallow landslides considering influence of impermeable bedrock