Abstract:Study of the processes of solid-phase reduction of iron from oxides using coals as reducing agents and the development of energy-efficient technologies for the production and use of metallized materials from concentrates obtained as a result of hydrometallurgical enrichment is an actual scientific direction in ferrous metallurgy. Theoretical studies of the processes of solidphase reduction of iron from iron-containing concentrate obtained as a result of hydrometallurgical enrichment of ferromanganese and polymetallic manganese-containing ores, by coals grades D (long-flame) and 2B (brown) were carried out by the method of thermodynamic simulation using the “Terra” software complex. The experimental study of the process of solid-phase reduction of iron from experimental mixtures was carried out in a muffle furnace SNOL 4/900 and in a resistance furnace with a graphite tubular heater (Tamman furnace). The influence of the composition and volume of gas phase, formed as a result of volatile components emission in the process of coals of two grades heating at 373–1873 K obtained, optimal temperature and consumption of coals defined, which ensure complete reducing of iron from iron-containing concentrate, compositions as well as volumes of gas phase. The influence of temperature of the isothermal exposure on the rate and degree of solid-phase reduction of iron from iron ore oxides was experimentally determined when using coals of different process grades and coke fines as reducing agents. Empirical equations of reduction degree versus time of isothermal exposure for different metallization temperatures were obtained. It is shown that the change in the degree of recovery on temperature with high accuracy was described by a linear dependence, and the change in the recovery rate on the temperature – by a power dependence. Conditions of effective metallization were determined when using iron concentrate and coals of different process grades for production of spongy metallized materials with content of Femet more than 80%, and 1.5–2.5 % C, 0.1 % S, 0.02 % P. As a result of thermodynamic simulation and experimental study of the process of iron reduction from iron concentrate, optimal consumption of coal of grades D and 2Б at temperature 1473K was determined. It was established that the best reducing agent with a minimum specific consumption is long-flame coal grade D. It was found that with an excess of reducing agent, it is possible to achieve almost complete extraction of iron from the concentrate, at the level of 98–99%.

Optimization of technological parameters of manganese metal aluminothermic smelting

Smelting of metallic manganese and manganese alloys in the gas-oxygen refining converter

Modeling and development of technology for smelting a complex alloy (ligature) Fe-Si-Mn-Al from manganese-containing briquettes and high-ash coals

Optimization of manganese-rich slag extraction from low-manganese ore smelting by response surface methodology

Phase equilibrium in aluminum and calcium treatment economically alloyed manganese steel in units lined with magnesite-based refractories

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Systematic Study on the Synthesis and Magnetism Properties of Manganese Ferrite MnFe2O4 by an Oxidation Roasting Process

"THERMODYNAMIC MODELING OF THE SMELTING PROCESS OF A NEW COMPLEX CHROMIUM-MANGANESE-SILICON CONTAINING FERROALLOY"

Study on optimum technological conditions of ore sintering flue gas desulfurization by using poor manganese

Manganese and Aluminium Recovery from Ferromanganese Slag and Al White Dross by a High Temperature Smelting-Reduction Process

Effects of CaO Content and Magnesium Additive in Electroslag on Desulfurization of Rejected Electrolytic Manganese Metal Scrap

Investigation of the process of metallized materials production from iron concentrate of hydrometallurgical enrichment of ferromanganese ores of Kuzbass

Aluminothermic Reduction of Manganese Oxide from Selected MnO-Containing Slags

Optimization of converting process for matte of oxidized nickel ores and sulfide copper ores joint smelting based on thermodynamic simulation

Development of Low-cost Smelting Reduction Process Using Cupola Furnace for Efficient Use of Inferior Grade Manganese Ores and Rejects

Production of complex Fe-Si-Mn-Cr ferroalloy using high-ash coal: a sustainable metallurgical approach

Preliminary study on smelting micro-carbon ferromanganese alloy by electro silicon thermal one-step process

Thermodynamic Modeling of the Vanadium Alloy Smelting Process Using a Silicon-aluminum Reducing Agent

THERMODYNAMIC MODELING OF PHASE EQUILIBRIA AT STEEL ALLOYED WITH MANGANESE AND CHROME

Improvement of blast furnace production using digital technology

Investigation on Desulfurization of Rejected Electrolytic Manganese Metal Scrap: Experiment and Mathematical Modeling