Abstract:Abstract Today, rare-earth elements are mainly introduced in alloys in the form of misch metal, which is a natural mixture of rare-earth elements (with atomic numbers 57–71). This mixture contains about 50 wt % cerium. The primary components of the mixture are generally cerium, lanthanum, and niobium. The specific composition depends on the particular field from which they were drawn. The variable composition of this mixture may significantly impair its effectiveness in alloying. The ratio of the individual elements in the mixture cannot be determined experimentally for each grade of steel, because of the prohibitive expense of such separation. However, thermodynamic modeling permits determination of the optimal concentration of each rare-earth element and the composition of the misch metal. In the present work, thermodynamic modeling is applied to the interaction of magnesium, aluminum, and lanthanum with oxygen in liquid iron. The thermodynamic model of the reduction of steel by mixtures of such active metals is considered. On the basis of literature data regarding the phase diagrams of the MgO–Al 2 O 3 , MgO–La 2 O 3 , and La 2 O 3 –Al 2 O 3 systems, the coordinates of points of invariant equilibrium in the MgO–La 2 O 3 –Al 2 O 3 system are established. The MgO–La 2 O 3 –Al 2 O 3 phase diagram is plotted. That permits the identification of all possible equilibria in the reduction of steel by magnesium, aluminum, and lanthanum and also the determination of corresponding descriptive equations. The activity of the components in liquid oxide melts is determined by the theory of subregular ionic solutions, taking account of the influence of the oxide melt’s composition on the coordination number of the cations. The activity of the components in metallic melts that are conjugate with the oxide systems is determined by means of the Wagner theory on the basis of first-order reaction parameters. The equilibrium constants of the reduction of steel by the given elements are established by indirect thermodynamic calculations. On the basis of the results, the solubility surface of the components in Fe–Mg–Al–La–O melts is constructed. That permits the identification of regions where the composition of the liquid metal corresponds to a particular oxide phase.

"THERMODYNAMIC MODELING OF THE SMELTING PROCESS OF A NEW COMPLEX CHROMIUM-MANGANESE-SILICON CONTAINING FERROALLOY"

Production of complex Fe-Si-Mn-Cr ferroalloy using high-ash coal: a sustainable metallurgical approach

Modeling and development of technology for smelting a complex alloy (ligature) Fe-Si-Mn-Al from manganese-containing briquettes and high-ash coals

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

THERMODYNAMIC MODELING OF PHASE EQUILIBRIA AT STEEL ALLOYED WITH MANGANESE AND CHROME

Thermodynamic Modeling of the Vanadium Alloy Smelting Process Using a Silicon-aluminum Reducing Agent

Modeling of Non-Ferrous Metallurgy Waste Disposal with the Production of Iron Silicides and Zinc Distillation

Ferrochrome Production in a Submerged Electric Arc Furnace: Fundamental Analysis Based upon the FactSage‐Macro Program Approach

Thermodynamic modelling of liquid slag-matte-metal equilibria applied to the simulation of the Peirce-Smith converter

Exploring Alloy Composition Dynamics: Thermodynamic Analysis of Fe-Al-Si-Cr System in Homogeneous Liquid State

A finite-element method model for a ferromanganese and silicomanganese pilot furnace

Phase equilibrium in aluminum and calcium treatment economically alloyed manganese steel in units lined with magnesite-based refractories

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Optimization of pyroprocessing of zinc sulfide ore to produce ferroalloy and zinc

THERMODYNAMICS OF THE PROCESSES OF INTERACTION OF LIQUID METAL COMPONENTS IN Fe – Mg – Al – La – O SYSTEM

Prediction of silicon content of alloy in ferrochrome smelting using data-driven models

Chemical Component Optimization Based on Thermodynamic Calculation of Fe-1.93Mn-0.07Ni-1.96Cr-0.35Mo Ultra-High Strength Steel

Smelting a Zn – Pb Sulfide Ore with Magnetite and Carbon for the Production of a Silicon Alloy and Extraction of Zinc and Lead into Sublimates

Formation of carbonitrides and precipitation of alloying elements during thermomechanical treatment of high-strength low-alloy steels. Atomistic modeling

Theoretical Investigation of Thermodynamic Properties of the Al-Si-Fe Ternary Alloy

Thermodynamics of the Interactions in Fe–Mg–Al–La–O Melts