Abstract:Mixed ionic‐electronic conducting (MIEC) cathode materials are promising for application in intermediate‐temperature solid oxide fuel cell due to their potentially low polarization resistance for oxygen reduction reaction. Sintering is a key step in fabricating MIEC composite cathode to form interconnected networks for gas transport and electron/ion conduction. However, the sintering process of MIEC composite electrodes has rarely been studied and thus not well understood. In this study, an enhanced kinetic Monte Carlo (KMC) model is proposed to study the microstructure evolution of the composite MIEC electrodes. The key microstructural properties such as average particle size, pore size, porosity, tortuosity, effective surface area and effective three‐phase boundary (TPB) length are comprehensively extracted from the reconstructed electrode by a series of the estimation algorithm. A backpropagation artificial neural network (ANN) is established for the quick prediction of micro properties during the sintering process. Besides, a global sensitivity analysis approach based on the elementary effects method is applied to assess the sensitivity degree of structural and operating parameters while Kolmogorov‐Smirnov test is conducted to ensure the reliability of the sampling strategy (P‐value >> .05). By considering the time evolution within the ANN surrogate model, this study firstly explores the coupling parametric effects of the KMC model at different sintering stages. The initial sintering stage (KMC steps <1000) is found to be the dominant section throughout the sintering procedure due to higher initial system free energy. Tortuosity and porosity show the most significant influence on the formation of effective surface and TPB reaction sites. Large tortuosity and small porosity favor the formation of effective surface reaction area but adversely hinder the gas transport at the same time. Free energy and sintering temperature are the determining factors in the sintering process. Even though grain growth and pore migration frequency show almost the same importance, their influence on the different output factors is quite different. This study establishes a qualitative framework to gain an essential perception about how the sintering process influences the micro properties of the electrode thereby efficiently guiding the sintering control and microstructure design. A kinetic Monte Carlo model is established considering sintering kinetics. A BP‐ANN method is proposed for quick prediction of micro‐characteristics An elementary effects approach is employed to perform global sensitivity analysis. Decisive role of initial powder fabrication on the sintering process is emphasized Porosity and tortuosity play the most significant effects than other structural factors. This study establishes a qualitative framework to gain an essential perception about how the sintering influences the micro properties of the electrode thereby efficiently guiding microstructure design. The initial sintering stage is found to be the dominant section throughout the sintering procedure. Tortuosity and porosity show the most significant influence on the formation of effective surface and TPB reaction sites. Large tortuosity and small porosity favor the formation of surface reaction area but adversely hinder gas transport.

Investigation of the Inner Microstructure of Composite Materials during their Densification by Scanning Electron Microscopy – LSM:YSZ Electrode Case Study

Analysis Of Impact Of Sintering Temperature On Microstructure Of Lscf-Sdc Composite Cathodes Using Nano-Ct

Coupling in-situ X-ray micro- and nano-tomography and discrete element method for investigating high temperature sintering of metal and ceramic powders

Visualizing the Structural Evolution of LSM/ X YSZ Composite Cathodes for SOFC by In-Situ Neutron Diffraction

Analysis of Impact of Sintering Time on Microstructure of LSM-YSZ Composite Cathodes by X-ray Nanotomography

Preparation and Characterization of One-Dimensional Nano-Structured Composite Cathodes for Solid Oxide Fuel Cells

Sintering kinetics and microstructure analysis of composite mixed ionic and electronic conducting electrodes

In-situ high temperature micromechanical testing of ultrafine grained yttria-stabilized zirconia processed by spark plasma sintering

The Microstructural Reconstruction of Variously Sintered Ni-SDC Cermets Using Focused Ion Beam Scanning Electron Microscopy Nanotomography

Quantifying microstructure features for high performance solid oxide cells

In-situ High-Temperature Micromechanical Behavior of Flash-Sintered Strontium Titanate

Microstructure and Conductivity of Blacklight‐sintered TiO2, YSZ, and Li0.33La0.57TiO3

Simulation of Sintering Kinetics and Microstructure Evolution of Composite Solid Oxide Fuel Cells Electrodes

Microstructure Evolution and Densification Behavior of Ultrafast High-Temperature Sintered Li6.5La3Zr1.5Ta0.5O12 Ceramics

Coarse-grained molecular dynamics modeling and analysis of graded porous electrodes of reversible solid oxide cells sintered in two steps

Study of Deformation Mechanisms in Flash-Sintered Yttria-Stabilized Zirconia by In-Situ Micromechanical Testing at Elevated Temperatures

Microstructures and Interfacial Resistance of Lsm-Sdc Composite Cathodes for It-Sofcs

In situ observation of the multistep process of cold sintering

In situ Probing of Interfacial Roughness and Transient Phases During Ceramic Cold Sintering Process

In Situ TEM Observations of Discharging/Charging of Solid-State Lithium-Sulfur Batteries at High Temperatures.

Quantifying Microstructure Features for High-Performance Solid Oxide Cells