Abstract:In real applications of warheads, not all charges are continuous. For specific purposes, such as power control and intermittent initiation, non-explosive materials are filled into the casing, which caused the charge to be discontinuous. In addition, detonators and control devices are often used with non-explosive materials. The effect of axial discontinuity of the charge on the fragment was not considered. In this study, we assumed that the non-explosive material was air, and divided the cylinder axially into charge and air parts axially. Existing formulae can neither accurately forecast fragment velocity from the charge part, nor predict that from the air part because of the non-existence of explosives. A cylinder with a discontinuous charge was investigated using a numerical method, and two charge parts were detonated from the air part because the initiator was usually in the non-explosive material to save space. It was found that the explosive products from the two charges were super-imposed in the middle of the air part, forming a superimposed high-pressure zone, which accelerated the air part and the charge part casings near the air part. The influence distance of the superimposed high-pressure zone on the charge parts is 2R, where R is the charge radius. A formula was established to predict the fragment velocity distribution. The simulation results were verified by X-ray radiography, where the circumferential half casing of each specimen was semi-preformed and the other half was natural. It was found that the project angle and axial density of the fragments were related to the axial-driven energy gradient but not to the shear stress exceeding the dynamic shear strength. The air part of the semi-preformed shell overlapped and formed a dense zone, whereas that of the natural shell broke at three abrupt axial-driven energy gradients and formed two fragments with greater mass and kinetic energy. The experimental data showed that the average relative error of the proposed formula was less than 4.5%, indicating that the proposed formula can predict the fragment velocity distribution from such a cylinder with sufficient accuracy. This study provides a basis and reference for the study of cylinders with discontinuous charges.

Specificities of Throwing the Shell of a Cylindrical Cumulative Charge to the Axis

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Study on the characteristics of initial shock waves generated by cylindrical charge for underwater explosion

Numerical Investigation On Characteristics Of The Shock Wave Generated By An Annular Nested Charge

Numerical Simulation of Conical Shaped Charge Jet Formation Process

Fragment Characteristics of Cylinder with Discontinuous Charge

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation

Study on Forming Law and Penetration of a Spherical Cone Composite Structure Liner Based on the Explosion Pressure-Coupling Constraint Principle

Novel hydrodynamic cumulation mechanism caused by quantum shell effects

Explosion wave and explosion fracture characteristics of cylindrical charges

Near-field Blast Loadings from Explosion of Two Typically Shaped Charges

Deformation characteristics of a ring-stiffened cylindrical shell induced by shock waves and coalesced bubbles in double-charge underwater explosions

Computational and Experimental Study of Detonation Propagation in TATB-Based Cylindrical Charges

Numerical Simulation of Forming Projectile with K-charge

General formulation of Coulomb explosion dynamics of highly symmetric charge distributions

Adaptive material point method for shaped charge simulation

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

Study on Big Entry Hole Bidirectional Shaped Charge

Meshfree particle simulation of the detonation process for high explosives in shaped charge unlined cavity configurations

Numerical Approach in Predicting the Formation Process of Tandem Explosively Formed Projectile