Abstract:The impact of the reaction environment on the formation of the polycrystalline layer and its biomedical (antimicrobial) applications were analyzed in detail. Copper oxide layers were synthesized using an electrodeposition technique, with varying additives influencing the morphology, thickness, and chemical composition. Scanning electron microscopy (SEM) images confirmed the successful formation of polyhedral structures. Unmodified samples (CuL) crystallized as a mixture of copper oxide (I) and (II), with a thickness of approximately 1.74 μm. The inclusion of the nonconductive polymer polyvinylpyrrolidone (PVP) during synthesis led to a regular and compact CuO-rich structure (CuL-PVP). Conversely, adding glucose resulted in forming a Cu2O-rich nanostructured layer (CuL-D(+)G). Both additives significantly reduced the sample thickness to 617 nm for CuL-PVP and 560 nm for CuL-D(+)G. The effectiveness of the synthesized copper oxide layers was demonstrated in their ability to significantly reduce the T4 phage titer by approximately 2.5-3 log. Notably, CuL-PVP and CuL-D(+)G showed a more substantial reduction in the MS2 phage titer, achieving about a 5-log decrease. In terms of antibacterial activity, CuL and CuL-PVP exhibited moderate efficacy against Escherichia coli, whereas CuL-D(+)G reduced the E. coli titer to undetectable levels. All samples induced similar reductions in Staphylococcus aureus titer. The study revealed differential susceptibilities, with Gram-negative bacteria being more vulnerable to CuL-D(+)G due to its unique composition and morphology. The antimicrobial properties were attributed to the redox cycling of Cu ions, which generate ROS, and the mechanical damage caused by nanostructured surfaces. A crucial finding was the impact of surface composition rather than surface morphology on antimicrobial efficacy. Samples with a dominant Cu2O composition exhibited potent antibacterial and antiviral properties, whereas CuO-rich materials showed predominantly enhanced antiviral activity. This research highlights the significance of phase composition in determining the antimicrobial properties of copper oxide layers synthesized through electrodeposition.

Cu-based nano-multilayer film produced by HiPIMS for antimicrobial properties and its application in photodetector

High-efficiency ZnO:Al/p-GaN epitaxial heterojunction photocatalysts for antimicrobial application

High power impulse magnetron sputtering (HiPIMS) for the fabrication of antimicrobial and transparent TiO2 thin films

CuO/ZnO Heterojunction Nanofilm for Effective Photocatalytic Disinfection

Implanting a Copper Ion into a TiO2 Nanorod Array for the Investigation on the Synergistic Antibacterial Mechanism between Mechanical Cracking and Chemical Damage

A Surface Oxide Thin Layer Of Copper Nanowires Enhanced The Uv Selective Response Of A Zno Film Photodetector

Eco-Friendly and Low-Cost Synthesis of Transparent Antiviral- and Antibacterial-Coated Films Based on Cu2O and MIL-53(Al)

Photogenerated reactive oxygen species and hyperthermia by Cu3SnS4 nanoflakes for advanced photocatalytic and photothermal antibacterial therapy

Nanoparticles Prepared by Spray Pyrolysis Technology for UV Detector Improvement: Study Bacterial Activity with Medical Physics

High power impulse magnetron sputtering growth processes for copper nitride thin film and its highly enhanced UV - visible photodetection properties

Polydopamine Ultrathin Film Growth on Mica via In-Situ Polymerization of Dopamine with Applications for Silver-Based Antimicrobial Coatings

Mesoporous polydopamine/copper sulfide hybrid nanocomposite for highly efficient NIR-triggered bacterial inactivation

Copper Oxide Electrochemical Deposition to Create Antiviral and Antibacterial Nanocoatings

Copper tannate nanosheets-embedded multifunctional coating for antifouling and photothermal bactericidal applications

Bactericidal and biocompatible properties of TiN/Ag multilayered films by ion beam assisted deposition

Surface Photodynamic Ion Sterilization of ITO-Cu2O/ZnO Preventing Touch Infection

Transparent conductive and near-infrared reflective Cu-based Al-doped ZnO multilayer films grown by magnetron sputtering at room temperature

Antibacterial properties and mechanism of biopolymer-based films functionalized by CuO/ZnO nanoparticles against Escherichia coli and Staphylococcus aureus

Magnetic-Field-Induced Improvement of Photothermal Sterilization Performance by Fe3O4@SiO2@Au/PDA Nanochains

Micropatterned CuS@PDMS films with anti-adhesive property for photothermal sterilization

Self-Sterilizing Sputtered Films for Applications in Hospital Facilities