Abstract:Oil leakage results in serious environmental pollution and severe waste of resources, which makes the development of low-cost, environmentally friendly, high-capacity, and durable oil absorbents an urgent task. In this paper, superhydrophobic coatings of activated carbon (AC)–TiO2– were developed without using any fluorine-containing reagents. The TiO2 particles were grown on the AC surface to form AC–TiO2 powders. The hydrophilic AC–TiO2 powders were further grafted with polydimethylsiloxane (PDMS) molecules (AC–TiO2–PDMS) to achieve superhydrophobicity through covalent reaction between PDMS and TiO2 under UV light. The AC–TiO2–PDMS powder was mixed with a PDMS polymer to form a superhydrophobic coating solution, which made the commercial sponge obtain durable superhydrophobicity. It showed high liquid repellency and antifouling ability toward various liquids and drinks. Taking advantage of the large surface area and high absorption capacity of AC, the coated sponge showed superior high absorption capacity (up to 100–158 g/g) toward various oils and organic solvents with a high absorption speed. Besides, the sponge showed high reusability that could be repeatedly used to absorb various oils and organic solvents. Moreover, the sponge also presented photocatalytic capability, which could repeatedly photodegrade the oil contaminants without influencing the superhydrophobicity, therefore largely increasing the recyclability and lifetime of the sponge. It also could separate immiscible oil–water mixtures with high efficiency and continuously remove oils from water. It was chemically stable and mechanically durable and could resist various harsh conditions without losing its superhydrophobicity. This study developed a facile, cost-effective, and environmentally friendly method to fabricate very promising absorbents for large-scale oil and solvent cleanups and recovery.This article has not yet been cited by other publications.

Three-dimensional biomimetic superhydrophobic nickel sponge without chemical modifications for efficient oil/water separation

Superhydrophobic nanoporous polymer-modified sponge for in situ oil/water separation

Facile Fabrication of Marine Algae-Based Robust Superhydrophobic Sponges for Efficient Oil Removal from Water

An environmentally friendly and superhydrophobic melamine sponge self-roughened by in-situ controllably grown polydopamine nanoparticle for efficient oil-water separation

Environment-Friendly Superhydrophobic Sponge for Highly Efficient Oil/Water Separation and Microplastic Removal

Ni-Al Layered Double Hydroxides (ldhs) Coated Superhydrophobic Mesh with Flower-Like Hierarchical Structure for Oil/water Separation

Simple preparation superhydrophobic melamine sponge via one-step emulsion polymerization for continuous oil/water separation in harsh environment

Superhydrophobic and photothermal sponge for effective oil/water separation and solar‐assisted recovery of viscous oil

A Durable Superhydrophobic Porous Polymer Coated Sponge for Efficient Separation of Immiscible Oil/water Mixtures and Oil-in-water Emulsions.

Superhydrophobic nanohybrid sponges for separation of oil/ water mixtures

Superhydrophobic three-dimensional porous ethyl cellulose absorbent with micro/nano-scale hierarchical structures for highly efficient removal of oily contaminants from water

Nanoparticle-decorated and poly(dimethyl siloxane)-modified superhydrophobic melamine sponge for efficient oil/water separation

Facile construction of superhydrophobic/superoleophilic melamine sponges with durability and antifouling for selective oil absorption and effective oil/water separation

Dual-functional underliquid superhydrophobic and superoleophobic stainless steel mesh decorated with Ni3S2 nanorods for continuous oil/water separation

Robust mussel-inspired superhydrophobic sponge with eco-friendly photothermal effect for crude oil/seawater separation

Green Fabrication of a Multifunctional Sponge as an Absorbent for Highly Efficient and Ultrafast Oil–Water Separation

Design and preparation of superhydrophobic NiS nanorods on Ni mesh for oil-water separation

Facile fabrication of compressible, magnetic and superhydrophobic poly(DVB-MMA) sponge for high-efficiency oil–water separation

Interfacial assembly of a durable superhydrophobic polyurethane sponge with "scalelike" structures for efficient oily emulsion separation

3D Multiscale Superhydrophilic Sponges with Delicately Designed Pore Size for Ultrafast Oil/Water Separation

Magnetic, self–heating and superhydrophobic sponge for solar–driven high–viscosity oil–water separation