Abstract:Oil leakage results in serious environmental pollution and severe waste of resources, which makes the development of low-cost, environmentally friendly, high-capacity, and durable oil absorbents an urgent task. In this paper, superhydrophobic coatings of activated carbon (AC)–TiO2– were developed without using any fluorine-containing reagents. The TiO2 particles were grown on the AC surface to form AC–TiO2 powders. The hydrophilic AC–TiO2 powders were further grafted with polydimethylsiloxane (PDMS) molecules (AC–TiO2–PDMS) to achieve superhydrophobicity through covalent reaction between PDMS and TiO2 under UV light. The AC–TiO2–PDMS powder was mixed with a PDMS polymer to form a superhydrophobic coating solution, which made the commercial sponge obtain durable superhydrophobicity. It showed high liquid repellency and antifouling ability toward various liquids and drinks. Taking advantage of the large surface area and high absorption capacity of AC, the coated sponge showed superior high absorption capacity (up to 100–158 g/g) toward various oils and organic solvents with a high absorption speed. Besides, the sponge showed high reusability that could be repeatedly used to absorb various oils and organic solvents. Moreover, the sponge also presented photocatalytic capability, which could repeatedly photodegrade the oil contaminants without influencing the superhydrophobicity, therefore largely increasing the recyclability and lifetime of the sponge. It also could separate immiscible oil–water mixtures with high efficiency and continuously remove oils from water. It was chemically stable and mechanically durable and could resist various harsh conditions without losing its superhydrophobicity. This study developed a facile, cost-effective, and environmentally friendly method to fabricate very promising absorbents for large-scale oil and solvent cleanups and recovery.This article has not yet been cited by other publications.

Superhydrophobic three-dimensional porous ethyl cellulose absorbent with micro/nano-scale hierarchical structures for highly efficient removal of oily contaminants from water

Designing MOFs/CuCo-LDHs Hybrid-Based Superhydrophobic Sponge for Speedy Eliminating Microplastics, Dyes, and Oils from High-Salinity Water

Green Fabrication of a Multifunctional Sponge as an Absorbent for Highly Efficient and Ultrafast Oil–Water Separation

Superhydrophobic nanoporous polymer-modified sponge for in situ oil/water separation

Facile Fabrication of Marine Algae-Based Robust Superhydrophobic Sponges for Efficient Oil Removal from Water

Interfacial assembly of a durable superhydrophobic polyurethane sponge with "scalelike" structures for efficient oily emulsion separation

An environmentally friendly and superhydrophobic melamine sponge self-roughened by in-situ controllably grown polydopamine nanoparticle for efficient oil-water separation

High porosity and hydrophobic cellulosic sponges for oil absorption

Superhydrophobic Melamine–Formaldehyde Sponge Functionalized by Coupling Agent–Isocyanate Siloxane as Efficient Absorbents for Oil and Organic Solvents

Facile construction of superhydrophobic/superoleophilic melamine sponges with durability and antifouling for selective oil absorption and effective oil/water separation

Biomass-activated carbon-based superhydrophobic sponge with photothermal properties for adsorptive separation of waste oil

Construction and Regulation of a Superhydrophobic Sponge via In Situ Anchoring of a Hyper-Cross-Linked Polymer for Efficient Oil/Water Separation

Superhydrophobic melamine sponges with high performance in oil/organic solvent sorption

A Durable Superhydrophobic Porous Polymer Coated Sponge for Efficient Separation of Immiscible Oil/water Mixtures and Oil-in-water Emulsions.

Superhydrophobic and photothermal sponge for effective oil/water separation and solar‐assisted recovery of viscous oil

Hierarchically porous superhydrophobic sponge for oil-water separation

Controllable self-foaming preparation of durable superhydrophobic/superlipophilic polyurethane sponge for efficient oily emulsions separation

Environment-Friendly Superhydrophobic Sponge for Highly Efficient Oil/Water Separation and Microplastic Removal

Design of Recyclable Superhydrophobic PU@Fe3O4@PS Sponge for Removing Oily Contaminants from Water

Scalable manufacturing of nonflammable bioinspired superhydrophobic sponge for oily wastewater treatment via water-based strategy

Green Preparation of Robust Hydrophobic β-Cyclodextrin/Chitosan Sponges for Efficient Removal of Oil from Water