Kinetics of pyrolysis of de-oiled neem seeds (Azadirachta indica)

Sohair. T. Aly,F. El Zahraa Mahmoud,M. A. Sorour,M. F. Abadir,M. I. El Saidy

DOI: https://doi.org/10.1007/s13399-024-05677-0

IF: 4.05

2024-05-03

Biomass Conversion and Biorefinery

Abstract:The use of de-oiled non-edible cakes as animal fodder often faces health hazards as in the case of jojoba and neem cakes. The potential use of these cakes as biofuel necessitates disclosing the kinetic parameters associated with the degradation of their lignocellulosic content, following pyrolysis. In the present work, neem seeds were crushed, de-oiled, and characterized using FTIR and EDX. They were subjected to thermal analysis in nitrogen flow at four different heating rates (5, 10, 15, and 20 K.min −1 ). At all heating rates, two peaks appeared corresponding to the devolatilization of lignocellulosic components. This process was completed at 400–420 °C with the formation of biochar. Cracking of the formed biochar takes place at higher temperatures, as evidenced by CHNS analysis resulting in a BET surface area of 54.196 m 2 .g −1 . The kinetics of these two steps were studied using the Kissinger–Asahira–Sunoze (KAS), Flynn–Wall Osawa (FWO), and the Friedman methods. For the first devolatilization step, the values of activation energy increase with conversion with averages of 116.16, 118.77, and 136.75 kJ.mol −1 respectively, while they averaged 114.52, 118.06, and 120.12 kJ.mol −1 , respectively, for the second degradation step. Application of the kinetic compensation effect produced straight lines when the logarithm of the pre-exponential factor was plotted against activation energy assuming for both steps a kinetic function corresponding to a first-order reaction mechanism (F1). The thermodynamic activation enthalpies of both degradation steps were determined and found to average 62.01 and 159.17 kJ.mol −1 , respectively, while the corresponding average activation entropies averaged – 47.17 and – 26.30 J.mol −1  K −1 , respectively.

energy & fuels,engineering, chemical