Abstract:In the present study, the co-pyrolysis of mahua seeds (MS) and waste thermocol (WTC) (1:1) blends was performed at 450–600 °C. The obtained co-pyrolysis oil (CPO) was characterized for physicochemical properties and its suitability as an alternative fuel. The performance, emission, and combustion characteristics of six different CPO diesel (CPOD) blends (B10, B20, B30, B40, B50, and B60) were also assessed at various engine loads. The experimental results indicated a maximum pyrolysis oil yield of 99.6% for waste thermocol pyrolytic oil (WTCPO) and 74.2% for CPO at 525 °C. The physicochemical characterization specified that CPO has a specific gravity, kinematic viscosity, and calorific value of 0.91 mL g−1, 1.94 cSt, and 40.6 MJ kg−1, respectively with a carbon chain length of C7–C24. The brake thermal efficiency (30.9 to 27.1%) and NO emission decreased with an increase in CPO percentage in the blends. The maximum heat release rate of CPOD blends increased with an increase in the percentage of CPO in diesel. The estimated mean value of activation energy (Ea), pre-exponential factors, enthalpy (ΔH), and Gibbs free energy (ΔG) for MS, WTC, and MS:WTC (1:1) blend were 135.1, 186.3, and 171.4 kJ mol−1; 18.1, 25.6, and 24.4 min−1; 130.6, 180.5, and 165.6 kJ mol−1; and 188.5, 301.1, and 206.3 kJ mol−1, respectively. The reaction function for the thermal degradation of MS and WTC was expressed as f(x) = (1– x)2.9, and f(x) = (1 – x)0.93 (0.017 + x 0.35) using multivariate nonlinear regression. The present research provides comprehensive data in understanding the engine performance characteristics, thermal behavior of biomass, and waste plastics that coexist in municipal solid waste.

Thermo-Catalytic Decomposition of Sesame Waste Biomass Over Ni-Co-Doped Mcm-41: Kinetics and Physico-Chemical Properties of the Bio-Oil

Thermo-catalytic decomposition of cotton seed press cake over nickel doped zeolite Y, hydrogen: enhanced yield of bio-oil with highly selective fuel-range hydrocarbons

Catalytic Deoxygenation of Oleic Acid over Synthesized Ni@CMK-3 Catalyst using Analytical Py-GC/MS and TG-FTIR

High quality bio-oil production from catalytic microwave-assisted pyrolysis of pine sawdust

Bio-oil production from catalytic pyrolysis of pine sawdust by NiO/HZSM-5 using microwave heating

Analysis of kinetics, mechanism, thermodynamic properties and product distribution for pyrolysis of Ni–Fe impregnated coconut husk

Response Surface Methodology for the Synthesis and Characterization of Bio-Oil Extracted from Biomass Waste and Upgradation Using the Rice Husk Ash Catalyst

Investigation of a Ni-Modified MCM-41 Catalyst for the Reduction of Oxygenates and Carbon Deposits during the Co-Pyrolysis of Cellulose and Polypropylene

Catalytic Co-Cracking of Used Cooking Oil Methyl Ester and Polystyrene Waste for Gasoline-Rich Biofuel Over Mesoporous Al-MCM-41 Catalyst

Investigation of Catalytic Co-Pyrolysis Characteristics and Synergistic Effect of Oily Sludge and Walnut Shell

Valorization of neem seeds biomass to biofuel via non-catalytic and catalytic pyrolysis process: Investigation of catalytic activity of Co-Mo/Al2O3 and Ni-Mo/Al2O3 for biofuel production

Co-pyrolysis behavior, engine performance characteristics, and thermodynamics of liquid fuels from mahua seeds and waste thermocol: A comprehensive study

Non-isothermal conversion of wheat husk and low-density polyethylene for energy dense fuel production

Microwave-assisted pyrolysis of waste cooking oil for bio-based hydrocarbons over Chem-CaO@SiC catalyst

Catalytic Co-Pyrolysis of Cellulose and Polypropylene over All-Silica Mesoporous Catalyst MCM-41 and Al-MCM-41.

Experimental investigation on utilization of Sesbania grandiflora residues through thermochemical conversion process for the production of value added chemicals and biofuels

Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation

Co-pyrolysis of refinery oil sludge with biomass and spent fluid catalytic cracking catalyst for resource recovery

Pyrolysis of Mixed Date Stones and Pistachio Shells: Identification of Bio-Oil and Utilization of Bio-Char as Activated Carbon Precursor

Characterization and mechanism elucidation of high-quality bio-oil production from co-pyrolysis of waste low-rank coal fines and de-oiled microalgae biomass using bimetallic (Cu-Cr) ZSM-5 catalyst

Co-pyrolysis of de-oiled microalgal biomass residue and waste tires: Deeper insights from thermal kinetics, behaviors, drivers, bio-oils, bio-chars, and in-situ evolved gases analyses