Abstract:Partial cracking is a feasible strategy to improve ammonia (NH 3 ) combustion. The nickel (Ni) based catalysts have become promising non-noble metal NH 3 decomposition catalysts owing to the low cost and decent performance. In order to meet the demand of reducing cost and expanding production, a batch of Ni catalysts were obtained by using low-cost supports and traditional impregnation preparation method. It was found that the Al 2 O 3 was the optimal support for Ni catalysts by comparing the catalytic performance. On the basis of Ni/Al 2 O 3 catalysts, the catalytic activity was further improved by introducing cerium (Ce) modification. The catalytic performance of Ce-doped catalysts enhanced at first and then decreased with the rise of Ce contents. Among all of catalysts in this work, the Ni/Al 0.5 Ce 0.5 O x catalysts possessed the highest activity and the lowest apparent activation energy. The characterization results suggested that the addition of Ce could destroy the pore structure of Al 2 O 3 supports, but it might promote the formation of more B5 active sites. The NH 3 temperature programmed desorption (NH 3 -TPD) results implied that the introduction of Ce strengthened the strong interactions between meatal and support, which improved the activity and stability of the Ce-doped catalysts. The Ni/Al 0.5 Ce 0.5 O x catalysts were proved to possess excellent resistance to the high temperature sintering through the 32 h's thermal stability test. This study provides a feasible path for preparing low-cost Ni catalysts for NH 3 decomposition.

Spatial Confinement of Electron-Rich Ni Nanoparticles for Efficient Ammonia Decomposition to Hydrogen Production

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

A New High Efficiency Catalyst of Co–Ni/CeO2 for Hydrogen Production by Ammonia Oxidative Decomposition at Low Temperature

Ce-promoted Ni-NiO Small Ensemble Constrained in an MgO Catalyst for Efficient Hydrogen Production Through NH3 Decomposition

Modulating Electronic Metal‐Support Interactions to Boost Visible‐Light‐Driven Hydrolysis of Ammonia Borane: Nickel‐Platinum Nanoparticles Supported on Phosphorus‐Doped Titania

Ce0.6Zr0.3Y0.1O2 solid solutions-supported Ni Co bimetal nanocatalysts for NH3 decomposition

Electronic Engineering Induced Ultrafine Non-Noble Nanoparticles for High-Performance Hydrogen Evolution from Ammonia Borane Hydrolysis

Promoted Multimetal Oxide Catalysts for the Generation of Hydrogen Via Ammonia Decomposition

Na‐ZSM‐5 Zeolite Nanocrystals Supported Nickel Nanoparticles for Efficient Hydrogen Production from Ammonia Decomposition

Boosting hydrogen production of ammonia decomposition via the construction of metal-oxide interfaces

Hydrogen production from ammonia decomposition over Ni/CeO2 catalyst: Effect of CeO2 morphology

Ammonia Cracking Catalyzed by Ni Nanoparticles Confined in the Framework of CeO2 Support

Facile Synthesis of Graphene-Supported Ni-CeO X Nanocomposites As Highly Efficient Catalysts for Hydrolytic Dehydrogenation of Ammonia Borane

Ce0.5Zr0.5O2 Solid Solutions Supported Co-Ni Catalyst for Ammonia Oxidative Decomposition to Hydrogen

Ni Nanoparticles Supported on Graphitic Carbon Nitride As Visible Light Catalysts for Hydrolytic Dehydrogenation of Ammonia Borane

Ultrasmall Rhodium Nanoclusters Anchored on Nitrogen-Doped Carbon Nanotubes with Embedded Nickel Nanoparticles As Magnetically Recyclable Catalysts for Efficient Ammonia-Borane Hydrolysis

Amorphous Nickel Nanofilms for Efficient Hydrogen Generation from ammonia borane

Metal nitride nanosheets enable highly efficient electrochemical oxidation of ammonia

Ammonia partial cracking over low-cost Ni catalysts for enhancing combustion

Synergistic Effect of Ni/Ni(OH)2 Core‐Shell Catalyst Boosts Tandem Nitrate Reduction for Ampere‐Level Ammonia Production

Synergistic effect between electric field and Ce-doped catalysts to promote hydrogen production from ammonia decomposition