Abstract:The stress evolution is monitored through operando pressure measurements in all‐solidLi‐state Li‐metal batteries (ASSLMBs). Two micro‐short circuit modes and their corresponding mechanisms are revealed based on the electrochemo‐mechanical response of the Li metal anode. Furthermore, a finite element model (FEM) is employed to explain this mechanical failure and an internal stress‐related "safety zone" for the Li metal anode is provided. Despite the relatively low stiffness of sulfide solid‐state electrolytes (SSEs), which makes them capable of better formability and accommodation for volume changes of active materials, the low fracture toughness (KIC) indicates a high susceptibility to fracture caused by electrochemo‐mechanical stresses. This susceptibility to mechanical damages and the subsequent lithium filament penetration, manifesting as micro‐short circuit events, seriously hinders the practical application of lithium metal in high‐energy‐density sulfide‐based all‐solid‐state lithium metal batteries (ASSLMBs). A full understanding of the stress evolution of Li metal anodes during cycling is key to decoding the mechanical damage‐induced micro‐short circuit behavior. Here, an operando and quantitative measurement of the stress evolution of an LTO/SSE/Li configuration all‐solid‐state battery (ASSB) operating with various parameters, including cell capacity and current density, is shown. Two micro‐short circuit modes and their corresponding mechanisms are revealed based on the electrochemo‐mechanical response of the Li metal anode. Furthermore, a finite element model (FEM) is used to explain this mechanical failure and a ′safety zone′′ for the Li metal anode related to the ′internal stress′′ is given. These findings provide new insight into the micro‐short circuit events induced by electrochemo‐mechanical damage in sulfide‐based ASSLMBs.

Identifying soft breakdown in all-solid-state lithium battery

Unveiling Solid-Solid Contact States in All-Solid-state Lithium Batteries:An Electrochemical Impedance Spectroscopy Viewpoint

Challenges and Prospects of All‐Solid‐State Electrodes for Solid‐State Lithium Batteries

New Consideration of Degradation Accelerating of All‐Solid‐State Batteries under a Low‐Pressure Condition

Current Status and Future Directions of All-Solid-state Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Transition Metal Oxide Cathodes

Detection, Analysis, and Behavior of Soft-Shorts in Solid-State Batteries

Decoding Internal Stress‐Induced Micro‐Short Circuit Events in Sulfide‐Based All‐Solid‐State Li‐Metal Batteries via Operando Pressure Measurements

High Performance All‐Solid‐State Lithium Batteries: Interface Regulation Mechanism

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Practical Application of All‐Solid‐State Lithium Batteries Based on High‐Voltage Cathodes: Challenges and Progress

Modeling of Void‐Mediated Cracking and Lithium Penetration in All‐Solid‐State Batteries

Insight into Dendrites Issue in All Solid-State Batteries with Inorganic Electrolyte: Mechanism, Detection and Suppression Strategies

Interface evolution of lithium metal anodes in all-solid-state batteries via mechanical–electrochemical investigations

Maintaining Interfacial Transports for Sulfide-Based All-Solid-State Batteries Operating at Low External Pressure

Nondestructively Visualizing and Understanding the Mechano‐Electro‐chemical Origins of “soft Short” and “creeping” in All‐Solid‐State Batteries

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Insight into All‐Solid‐State Li–S Batteries: Challenges, Advances, and Engineering Design

Recent progress in all-solid-state lithium batteries: The emerging strategies for advanced electrolytes and their interfaces

Understanding all solid-state lithium batteries through in situ transmission electron microscopy

Unlocking the Electrochemical–Mechanical Coupling Behaviors of Dendrite Growth and Crack Propagation in All‐Solid‐State Batteries

Designing All-Solid-State Batteries by Theoretical Computation: A Review