Challenges and Prospects of All‐Solid‐State Electrodes for Solid‐State Lithium Batteries

Shaowen Dong,Li Sheng,Li Wang,Jie Liang,Hao Zhang,Zonghai Chen,Hong Xu,Xiangming He

DOI: https://doi.org/10.1002/adfm.202304371

IF: 19

2023-08-05

Advanced Functional Materials

Abstract:Solid‐state lithium batteries are limited commercially; however, solid electrolytes are safer than liquid electrolytes and have wide electrochemical windows. Unfortunately, research on solid electrodes, which also affect battery energy and capacity density, is lacking. This review discusses progress in developing solid electrode interfaces including mechanical stability, stress measurement, and fabrication process. Factors influencing their electrochemical performance are also identified. In the development of all‐solid‐state lithium batteries (ASSLB), progress is made with solid‐state electrolytes; however, challenges regarding compatibility and stability still exist with solid electrodes. These issues result in a low battery capacity and short cycle life, which limit the commercial application of ASSLBs. This review summarizes the recent research progress on solid‐state electrodes in ASSLBs including the solid–solid interface phenomena such as the interface between electrode materials and electrolytes. The mechanical stability problems in solid electrodes, including fracture, brittleness, and deformation of electrode materials, are also discussed, and corresponding methods to measure the solid electrode stress are provided. In addition, strategies for mitigating stress‐related issues are examined. Finally, the fabrication process of solid electrodes is introduced and their future developments, including the exploration of new electrode materials and the design of more intelligent electrode structures, are proposed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

This paper attempts to solve the compatibility and stability problems existing in solid - state electrodes in all - solid - state lithium - ion batteries (ASSLBs). These problems lead to low battery capacity and short cycle life, thus limiting the commercial application of ASSLBs.

Specifically, the paper focuses on the following problems:

1. **Solid - solid interface phenomena**: including interface reactions between electrode materials and electrolytes, element diffusion, fracture and volume change of active materials, and poor contact between active materials and solid electrolytes. These interface problems will lead to mechanical instability of electrode materials and high interface resistance, thus affecting battery performance.

2. **Mechanical stability problems**: During the charging and discharging process, the solid - state electrode will generate stress due to factors such as lattice structure, size and phase change, which will cause the atomic lattice of the electrode material to distort and expand, and then cause electrode rupture and loss of contact between particles. In addition, the negative electrode material will also generate stress during the frequent lithium stripping/deposition process.

3. **Ion/electron transport network**: In the solid - state electrode, the ion/electron transport network formed between active material particles and other additives is crucial for improving the energy density and capacity density of the battery. However, the ion transport path in the solid - state electrode is complex and less efficient, especially in the porous composite electrode, and the transport of Li⁺ depends on the number of free Li⁺ and the transport path.

4. **Space - charge - layer effect (SCL)**: When two materials are in contact, due to their different potentials, a space - charge - layer will be formed at the interface, causing Li⁺ to migrate from the electrolyte side to the electrode material side, and finally forming the "lithium depletion phenomenon", increasing the interface resistance and polarization and reducing the battery performance.

To solve the above problems, the paper summarizes the research progress in solid - state electrodes in recent years and proposes improvement strategies, such as introducing a buffer layer to reduce the space - charge - layer effect, optimizing the microstructure of electrode materials to improve mechanical stability and ion - transport efficiency, etc. In addition, the paper also discusses the preparation process of solid - state electrodes and their future development directions, including exploring new electrode materials and designing more intelligent electrode structures.