Abstract:Increasing demand for electrochemical energy storage devices with high energy density, high power density, and long lifespan has posed significant challenges for developing suitable electrodes and electrolyte systems with fast charge transport kinetics and superior cycling stability. 1 As one of the promising electrode materials explored recently, MXenes (M n+1 X n T x ) are a group of two-dimensional transition metal carbides and/or nitrides, in which M is early transition metal, X presents C and/or N, T x stands for the surface groups such as =O, -OH, -Cl or -F. They exhibit excellent high-rate performance in electrochemical energy storage applications due to their unique properties: superior electronic conductivity (~15 000 S cm -1 ) and large interlayer spacing (~1 nm). 2 The charge storage mechanism and performance of the MXenes electrode is highly dependent on the electrode and electrolyte composition. For example, Ti 3 C 2 T x has shown rapid pseudocapacitive (de)intercalation of protons and transformation between the oxygen surface groups (=O) and hydroxyl (-OH) groups in acidic aqueous electrolytes. 3,4 As a result, Ti 3 C 2 T x exhibits an ultrahigh volumetric capacitance of 1500 F cm -3 in H 2 SO 4 electrolyte. 5 In less corrosive neutral aqueous electrolytes, the cation intercalation is accompanied by negligible charge transfer, leading to ultrafast charge storage. 6 Consequently, a moderate capacitance with superior cycling stability is reported in neutral electrolytes compared to acidic electrolytes. In contrast to dilute aqueous electrolyte, which has a limited electrochemical stability window (ESW), the highly concentrated water-in-salt (WIS) electrolyte possesses a large ESW (∼3.0 V) owing to the depressed activity of free water. Besides, the unique solvation structure of WIS electrolyte induces a novel intercalation of fully-solvated Li + at positive potential and increases the capacitance of MXene. 7 As a result, WIS electrolyte helps overcome the drawback of the low energy density of MXene in neutral aqueous electrolytes. In our research, we explored the impact of MXene structure and a novel electrolyte system on the pseudocapacitive performance of MXene. The charge storage behavior of Ti 3 C 2 T x in a molecular crowding electrolyte was explored. Interestingly, Ti 3 C 2 T x displayed one pair of redox peaks with low polarization, differing from both dilute neutral aqueous electrolyte and WIS electrolyte, which may be attributed to the intercalation of Polyethylene glycol (PEG)-solvated Li + cluster. The in situ X-ray diffraction are employed to better understand the charge storage process. We also constructed a MXene/polymer heterostructure with enlarged interlayer spacing. The unique heterostructure delivered a significantly enhanced rate performance in neutral aqueous electrolyte. (a high capacitance retention of 81% at 10 A g -1 ) Reference: Simon, P. & Gogotsi, Y. Nature Materials 7 , 845–854 (2008). Anasori, B. et al. Nature Reviews Materials 2 , 16098 (2017). Mu, X. et al . Advanced Functional Materials 29 , 1902953 (2019). Zhan, C. et al. J. Phys. Chem. Lett. 9 , 1223–1228 (2018). Lukatskaya, M. R. et al. Nat Energy 2 , 1–6 (2017). Ando, Y. et al. Advanced Functional Materials 30 , 2000820 (2020). Wang, X. et al . ACS Nano 15 , 15274–15284 (2021).

Pristine Titanium Carbide MXene Hydrogel Matrix

Remarkable Hydrogen Absorption/desorption Behaviors and Mechanism of Sodium Alanates In-Situ Doped with Ti-based 2D MXene

Pristine Titanium Carbide Mxene Films With Environmentally Stable Conductivity And Superior Mechanical Strength

Ti 3 AlCN MAX for tailoring MgH 2 hydrogen storage material: from performance to mechanism

Binder-Free Ti 3 C 2 T x MXene Doughs with High Redispersibility

Highly-dispersed Nano-Tib2 Derived from the Two-Dimensional Ti3CN MXene for Tailoring the Kinetics and Reversibility of the Li-Mg-B-H Hydrogen Storage Material

Ambient-Stable Two-Dimensional Titanium Carbide (MXene) Enabled by Iodine Etching

Hydroiodic-Acid-Initiated Dense yet Porous Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i> MXene Monoliths toward Superhigh Areal Energy Storage

Hydroiodic Acid Initiated Dense yet Porous Ti3C2Tx MXene Monoliths towards Superhigh Areal Energy Storage

Expediting High‐Yield Mxene Carbides and Nitrides Synthesis for Next‐Generation 2D Materials

Covalently grafting multihydroxy hyperbranched polymer on the surface of Ti3C2Tx MXene with remarkably enhanced colloidal stability and functionality for photothermal therapy

Ambient-stable MXene with superior performance suitable for widespread applications

Stability of Ti 3 C 2 T x MXenes in Engineered Environments

Tough and Robust Metallosupramolecular Hydrogels Enabled by Ti3C2Tx MXene Nanosheets

Understanding the Oxidation Degradation Mechanism to Enable Preparation of Ambient&nbsp;Ultra Stable Ti <sub>3</sub>c <sub>2</sub>t &Lt;sub>x</sub>-Mxene

Bridged Ti 3 C 2 T X MXene Film with Superior Oxidation Resistance and Structural Stability for High-Performance Flexible Supercapacitors

Simultaneously addressing self-stacking and oxidative degradation issues of Ti3C2Tx MXene through biothermochemistry induced 3D crosslinking

Fast and High-Yield Anhydrous Synthesis of Ti3 C2 Tx MXene with High Electrical Conductivity and Exceptional Mechanical Strength

High-Rate Electrochemical Energy Storage of MXene in Neutral Aqueous Electrolytes

An Organic Solvent-Assisted Intercalation and Collection (OAIC) for Ti3C2Tx MXene with Controllable Sizes and Improved Yield

Nanoconfined and in Situ Catalyzed MgH 2 Self-Assembled on 3D Ti 3 C 2 MXene Folded Nanosheets with Enhanced Hydrogen Sorption Performances