Abstract:MXenes are a newer class of 2D materials, possess with desirable properties such as large specific surface area, conductivity, and hydrophilicity, making them attractive for various environmental applications, including remediation and as membranes for water treatment. Until recently, the practical implementation of MXenes was hindered by their instability in water, although improved synthesis procedures have largely addressed this issue. Consequently, it is now important to assess the stability of MXenes in engineered environments relevant to drinking water and membrane operation (e.g. backwashing). In this study, Ti 3 C 2 T x MXenes were found to remain stable upon exposure to an aqueous environment saturated with oxygen and to UVC and UVA light at circumneutral pH, but were transformed upon exposure to Fe(III) chloride and free chlorine. The chlorination reaction kinetics are 1st order with respect to Ti 3 C 2 T x and free chlorine concentration, with a rate constant that increased at pH ≤ 7.5, implicating HOCl as the reactive species. We propose that MXene reactions with HOCl occur by an electrophilic attack of Cl + , forming TiO 2 and degrading the MXene. AFM data shows that transformations are initiated at the edges of the MXene sheets and localized areas on the MXene, suggesting that the initial sites for Cl + attack are defect sites and/or uncoordinated Ti atoms. During the initial stages of the oxidative degradation, the sheet-like structure of colloidal MXenes is preserved, although prolonged chlorine exposure leads to three-dimensional crystalline (anatase) TiO 2 formation. The degradation of MXenes during chlorinationThis contrasts with the inertness of nanoscale TiC, highlighting the need to devise surface modification processes that will allow MXenes to resist the oxidative conditions associated with membrane regeneration/backwashing.

Stability of Ti 3 C 2 T x MXenes in Engineered Environments

The formation potential of disinfection by-products of Ti3C2Tx MXene

Electrochemical Stability of MXenes in Water Based on Constant Potential AIMD Simulations

Preparation and Evaluation of a High Performance Ti 3C 2T X-Mxene Membrane for Drinking Water Treatment

Understanding the Oxidation Degradation Mechanism to Enable Preparation of Ambient&nbsp;Ultra Stable Ti <sub>3</sub>c <sub>2</sub>t &Lt;sub>x</sub>-Mxene

Microstructure and Surface Control of MXene Films for Water Purification

Colloidal Behaviors of Two-Dimensional Titanium Carbide in Natural Surface Waters: the Role of Solution Chemistry.

Combination of High pH and an Antioxidant Improves Chemical Stability of Two-Dimensional Transition-Metal Carbides and Carbonitrides (MXenes) in Aqueous Colloidal Solutions

Enhancing the Chemical Stability of MXene Through Synergy of Hydrogen Bond and Coordination Bond in Aqueous Solution

Ultralong Stability of Ti3C2Tx-MXene Dispersion Through Synergistic Regulation of Storage Environment and Defect Capping with Tris-HCl Buffering

Ambient-Stable Two-Dimensional Titanium Carbide (MXene) Enabled by Iodine Etching

Ambient Oxidation of Ti3C2 MXene Initialized by Atomic Defects

Ambient-stable MXene with superior performance suitable for widespread applications

Micro-Oxidized Mxene Membrane with Superior Stability for Efficient Water Purification

Effect of Sodium Dodecyl Sulfate on Stability of MXene Aqueous Dispersion

Review-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene: An Emerging Two-Dimensional Layered Material in Water Treatment

Stabilizing Ti3C2Tx MXene flakes in air by removing confined water

A comprehensive review on the use of Ti3C2Tx MXene in membrane-based water treatment

Surface Charge Engineering for Two-Dimensional Ti2CTx MXene for Highly Efficient and Selective Removal of Cationic Dye from Aqueous Solution

The Impact of Metal Ions on MXene Membranes: Critical Role of Titanium Vacancies

<i>In situ</i> crystallization and growth of TiO<sub>2</sub> nanospheres between MXene layers for improved adsorption and visible light photocatalysis