Abstract:Laser shock peening (LSP) was implemented to treat aircraft landing gear 50CrVA alloy to improve mechanical properties. The sensitivity investigations of time step and mesh size were used to benchmark the 3D finite element method (FEM) model. Based on the established FEM model, the dynamic propagation characteristics of the shock wave inside the sample were predicted. The influence of laser energy and spot diameter on the residual stress field was further investigated. The numerical results indicate that regulating two critical LSP parameters can effectively improve the compressive residual stress (CRS) of metals, and the spot diameter has a greater effect than the laser energy in improving the uniformity of the CRS distribution. After that, the influences of LSP on the CRS field, microstructure, and mechanical properties were experimentally studied. After LSP treatment, the surface CRS reached 494.8 ± 31.8 MPa with an affected depth of about 400 μm. The phase composition was not changed by LSP treatment, but it weakened texture strength and refines grains. Under the impact of grain refinement and CRS, the average surface microhardness of the 50CrVA alloy reached 355 HV, indicating an increase up to 5.3 %. The ultimate tensile strength and yield strength were increased by 11.3 % and 14.5 %, respectively, which were in contrast to the unchanged elongation. This work verifies the feasibility of mechanical properties enhancement of 50CrVA alloy by LSP.

The effect of laser shock peening on the rotating bending fatigue resistance of S51740 stainless steel

Fatigue crack initiation and growth of laser shock peened 2Cr13 martensitic stainless steel as a function of the coverage layer

Effect of laser shock peening on high cycle fatigue properties of aluminized AISI 321 stainless steel

Effect of the Absorption Layer on the Microstructure and Mechanical Properties of M50 Steel by Laser Shock Peening

Effect of Laser Shock Peening on the Fatigue Life of 1Cr12Ni3Mo2VN Steel for Steam Turbine Blades

Optimization of multiple laser shock peening on high-cycle fatigue performance of aluminized AISI 321 stainless steel

Effect of laser shock peening uniformity on bending fatigue life of 20CrNiMo

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Experimental and Numerical Studies of Fatigue Behavior of Ti6Al4V Alloy Treated by Laser Shock Peening

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Laser shock peening for enhanced fatigue resistance in steel structures: Insights from Q960 steel study

The Effect of Severe Shot Peening on Fatigue Life of Laser Powder Bed Fusion Manufactured 316L Stainless Steel

Influence of Laser Peening Parameters on Residual Stress Field of 304 Stainless Steel

The effects of laser peening on laser additive manufactured 316L steel

Laser shock peening induced mechanical properties enhancement of 50CrVA alloy

Influence of laser parameters on residual stress field of AISI 304 stainless steel induced by laser peening: A finite element analysis

Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy

Enhancement of corrosion resistance of 304L stainless steel treated by massive laser shock peening

Effects of Multiple Laser Shock Peening Impacts on Microstructure and Wear Performance of Wire-Based Laser Directed Energy Deposition 17-4PH Stainless Steel

Residual Stress Field Induced by Laser Peening: a Finite Element Analysis

The Synergetic Effects of Shot Peening and Laser-Shot Peening on the Microstructural Evolution and Fatigue Performance of a Medium Carbon Steel