Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Polypyrrole-Bentonite composite as a highly efficient and low cost anionic adsorbent for removing hexavalent molybdenum from wastewater

Polypyrrole Coated Molybdenum Disulfide Composites As Adsorbent for Enhanced Removal of Cr(VI) in Aqueous Solutions by Adsorption Combined with Reduction

Efficient removal of U(VI) from solution using a MoS42− ion-exchange functionalized polypyrrole composite material

Preparation of Composite Porous Hydrogel Montmorillonite/Humic Acid/Polyvinyl Alcohol@Polypyrrole Based on Pickering Emulsion Template Method for Enhancing Hexavalent Chromium Ions Adsorption from Aqueous Solution

Polypyrrole/waste molasses composites as a superior adsorbent for highly efficient and selective removal of Cr(VI) from aqueous environments

Enhanced sorption and reduction of Cr(VI) by the flowerlike nanocomposites combined with molybdenum disulphide and polypyrrole

Preparation of a novel metal-free polypyrrole-red phosphorus adsorbent for efficient removal of Cr(VI) from aqueous solution

A Millimeter-Sized Negatively Charged Polymer Embedded with Molybdenum Disulfide Nanosheets for Efficient Removal of Pb(II) from Aqueous Solution

Polymer-microsphere coated with MoS 2 nanoflowers for the removal of Pb(II) from water: Polydopamine-mediated MoS 2 assembly and efficient Pb(II) adsorption

Polypyrrole/bacterial cellulose nanofiber composites for hexavalent chromium removal

Polypyrrole Coating via Lemieux-von Rudloff Oxidation on Magnetite Nanoparticles for Highly Efficient Removal of Chromium(VI) from Wastewater

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Flexible and free-standing pristine polypyrrole membranes with a nanotube structure for repeatable Cr(VI) ion removal

Polypyrrole-functionalized magnetic Bi2MoO6 nanocomposites as a fast, efficient and reusable adsorbent for removal of ketoprofen and indomethacin from aqueous solution

Selective adsorption performance of H6P2Mo15W3O62-based Cu3(BTC)2 composite in treatment of simulated cationic dye wastewater

Construction of polyphosphazene-coated halloysite nanotube composite with in-situ released PO 4 3− for efficient and rapid removal of uranium from wastewater

Insight into the synergistic adsorption-reduction character of chromium(VI) onto poly(pyrogallol-tetraethylene pentamine) microsphere in synthetic wastewater

Cu2MoS4-based magnetic composites as effective adsorbent and photocatalyst for removal of organic contaminants in water

Poly(diallyldimethylammonium-MoS4) Based Amorphous Molybdenum Sulphide Composite for Selectively Mercury Uptake from Wastewater Across a Large Ph Region.

Preparation of a novel polypyrrole/dolomite composite adsorbent for efficient removal of Cr(VI) from aqueous solution

Chromium removal using a magnetic corncob biochar/polypyrrole composite by adsorption combined with reduction: Reaction pathway and contribution degree A Physicochemical and engineering aspects