Abstract:Thermal infrared cameras provide unique information on surface temperature that can benefit a range of environmental, industrial and agricultural applications. However, the use of uncooled thermal cameras for field and unmanned aerial vehicle (UAV) based data collection is often hampered by vignette effects, sensor drift, ambient temperature influences and measurement bias. Here, we develop and apply an ambient temperature-dependent radiometric calibration function that is evaluated against three thermal infrared sensors (Apogee SI-11(Apogee Electronics, Santa Monica, CA, USA), FLIR A655sc (FLIR Systems, Wilsonville, OR, USA), TeAx 640 (TeAx Technology, Wilnsdorf, Germany)). Upon calibration, all systems demonstrated significant improvement in measured surface temperatures when compared against a temperature modulated black body target. The laboratory calibration process used a series of calibrated resistance temperature detectors to measure the temperature of a black body at different ambient temperatures to derive calibration equations for the thermal data acquired by the three sensors. As a point-collecting device, the Apogee sensor was corrected for sensor bias and ambient temperature influences. For the 2D thermal cameras, each pixel was calibrated independently, with results showing that measurement bias and vignette effects were greatly reduced for the FLIR A655sc (from a root mean squared error (RMSE) of 6.219 to 0.815 degrees Celsius (°C)) and TeAx 640 (from an RMSE of 3.438 to 1.013 °C) cameras. This relatively straightforward approach for the radiometric calibration of infrared thermal sensors can enable more accurate surface temperature retrievals to support field and UAV-based data collection efforts.

Measurement Uncertainty in Fourier Coefficient- Based Time Series Reconstruction Considering Calibration Effects in Thermal Imaging

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

A Soft Calibration Technique for Infrared Imaging Based on Physical Model of Thermal Radiation and Variational Bayesian Inference from Small Dataset

Handy method to estimate uncertainty of temperature measurement by infrared thermography

StarDICE II: Calibration of an Uncooled Infrared Thermal Camera for Atmospheric Gray Extinction Characterization

A high-precision thermal imaging approach based on Bayesian inference for EMC diagnosis

A Calibration Procedure for Field and UAV-Based Uncooled Thermal Infrared Instruments

Quantitative Measurement of Thermal Conductivity by SThM Technique: Measurements, Calibration Protocols and Uncertainty Evaluation

On-the-fly Extrinsic Calibration of Multimodal Sensing System for Fast 3D Thermographic Scanning

Thermal Imaging Metrology Using High Dynamic Range Near-Infrared Photovoltaic-Mode Camera

Calibrations and the measurement uncertainty of wide-band liquid crystal thermography

Novel Entropy for Enhanced Thermal Imaging and Uncertainty Quantification

Assessment and Improvement of Distance Measurement Accuracy for Time-of-Flight Cameras

Measuring Thermal Emission Near Room Temperature Using Fourier-Transform Infrared Spectroscopy

Effect of Coating Thickness on the Calibration and Measurement Uncertainty of A Wide-Band Liquid Crystal Thermography

Calibration and Uncertainty Estimation of Non-Contact Coordinate Measurement Systems Based on Kriging Models

UNCERTAINTY QUANTIFICATION USING THERMOCOUPLE AND ARDUINO® COMPATIBLE HARDWARE

Use of the Monte Carlo method for the estimation of measurement uncertainty in chemical analysis systems with intensive mathematical treatment

Calibration Using Matrix Completion with Application to Ultrasound Tomography

Management of thermal drift of bolometric infrared cameras: limits and recommendations