Abstract:Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To capture dose-dependent evolution of properties, we experimentally characterise samples with damage levels from 0.01 to 1 dpa. Spherical nano-indentation of <001> grains shows hardness increasing up to a dose of 0.032 dpa, beyond which it saturates. AFM measurements show pile-up increasing up to the same dose, beyond which large pile-up and slip-steps are seen. Based on the observations we develop a crystal plasticity (CPFE) model for the irradiated material. It captures irradiation-induced hardening followed by strain-softening through interaction of irradiation-defects and gliding dislocations. Shear resistance of irradiation-defects is derived from TEM observations of similarly irradiated samples. Nano-indentation of pristine and implanted tungsten of doses 0.01, 0.1, 0.32 and 1 dpa is simulated. Two model parameters are fitted to the experimental results of the 0.01 dpa sample and are kept unchanged for all other doses. Peak load, indent surface profiles and damage saturation predicted by the CPFE model closely match experimental observations. Predicted lattice distortions and dislocation distributions around indents agree with corresponding measurements from HR-EBSD. Finally, the CPFE model is used to predict the macroscopic stress-strain response of similarly irradiated bulk tungsten material.

Machine-learning interatomic potential for radiation damage and defects in tungsten

Large-scale machine-learning molecular dynamics simulation of primary radiation damage in tungsten

On the classification and quantification of crystal defects after energetic bombardment by machine learned molecular dynamics simulations

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Deep neural network potential for simulating hydrogen blistering in tungsten

A tungsten deep neural-network potential for simulating mechanical property degradation under fusion service environment

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

The Evolution of Structural Defects under Irradiation in W by Molecular Dynamics Simulation

High-dose long-time defect evolution in tungsten studied by atomistically informed Object Kinetic Monte Carlo simulations

Machine-learning Interatomic Potential for Radiation Damage Effects in Bcc-Iron

Molecular Dynamics Simulation of Nanoporous Tungsten

Plasma and X-ray radiation-induced damage mechanisms in a tungsten heavy alloy

Molecular dynamics simulations of the defect evolution in tungsten on successive collision cascades

Utilizing a machine-learned potential to explore enhanced radiation tolerance in the MoNbTaVW high-entropy alloy

A new interatomic potential of W-Ni-Fe systems for point defects and mechanical property studies

Computer simulation of displacement cascades in tungsten with modified F-S type potential

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study

Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion

Machine learned interatomic potential for dispersion strengthened plasma facing components

Highly porous tungsten for plasma-facing applications in nuclear fusion power plants: a computational analysis of hollow nanoparticles