Abstract:Phase change materials (PCMs) exhibit considerable potential for utilization in energy storage and temperature regulation applications, primarily attributed to their notable latent heat capacity . Nevertheless, the intrinsically limited thermal conductivity of PCMs necessitates the use of thermal conductivity enhancers (TCEs) that possess adjustable features to compensate for greater heat storage efficiency. Porous structures with flexible design freedom have garnered growing interest in contrast to traditional random foams, owing to their significantly larger surface areas and fully interconnected pore networks. This study fabricated three polar form-designed triply periodic minimal surfaces (TPMS) porous structures using selective laser melting (SLM) based on various radial density gradients , namely the uniform density, the linear gradient, and the Boltzmann gradient. The TPMS porous structures were incorporated as TCEs within a paraffin matrix to form composite TPMS-PCMs. The melting behavior of composite TPMS-PCMs during the charging process was investigated by employing both visual experiments and numerical methods. A thorough analysis was undertaken regarding the progression of solid-liquid phase interfaces, temperature distribution, convection distribution, and heat storage rate to elucidate the mechanisms that contribute to enhanced heat transfer. The findings indicate that the configuration of the density gradient has a notable impact on the melting behavior of composite TPMS-PCMs by tuning heat transfer paths. The heat storage rate of the linear gradient case is the highest among the three, reaching 12.1 W, 1.6 times that of the uniform density case, and twice that of the Boltzmann gradient case. Although the Boltzmann gradient case has the lowest heat storage rate, it demonstrates exceptional performance in terms of temperature uniformity. The average temperature gradient along the radius during melting is 348.6 °C/m, which is only 59% observed in the linear gradient case and 56% in the uniform density case. These findings substantiate the effectiveness of the radial gradient density design in the control of the thermal storage process of composite TPMS-PCMs. They serve as a reference for optimizing thermal storage and temperature control systems that rely on latent heat storage in the future.

Optimization of PCM layer height of cascaded two-layered packed-bed thermal energy storage tank with capsules of varying diameters based on genetic algorithm

Optimization of capsule diameters in cascade packed-bed thermal energy storage tank with radial porosity oscillations based on genetic algorithm

Evaluation of PCM Thermophysical Properties on a Compressed Air Energy Storage System Integrated with Packed-Bed Latent Thermal Energy Storage

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Optimization of the packed-bed thermal energy storage with cascaded PCM capsules under the constraint of outlet threshold temperature

Numerical study on stratification performance of cascaded three-layered packed-bed in the thermal storage process

Thermal performance analysis and optimization of cascaded packed bed latent heat storage tank

Phase change material thermal energy storage design of packed bed units

Experimental and numerical study of cylindrical encapsulated phase change material in packed bed thermal energy storage with expansion and shrinkage effects

Multi-factor analysis and optimization design of a cascaded packed-bed thermal storage system coupled with adiabatic compressed air energy storage

Pore-scale numerical investigation on the thermal storage properties of packed-bed systems with phase change material microcapsules

Design Optimization on Characteristics of Packed-Bed Thermal Energy Storage System Coupled with High Temperature Gas-Cooled Reactor Pebble-Bed Module

Optimization of thermal storage performance of cascaded multi-PCMs and carbon foam energy storage system based on GPR-PSO algorithm

A review on numerical simulation, optimization design and applications of packed-bed latent thermal energy storage system with spherical capsules

Improving the charging performance of latent heat thermal energy storage systems using triply periodic minimal surface (TPMS) structures

Modeling on Heat Storage Performance of Compressed Air in a Packed Bed System

Golf-ball-inspired Phase Change Material Capsule: Experimental and Numerical Simulation Analysis of Flow Characteristics and Thermal Performance

Experimental study on the performance of packed-bed latent thermal energy storage system employing spherical capsules with hollow channels

Thermal Performance Analysis of PCM Capsules Packed-Bed System with Biomimetic Leaf Hierarchical Porous Structure

Analysis of thermal storage behavior of composite phase change materials embedded with gradient-designed TPMS thermal conductivity enhancers: A numerical and experimental study

Optimization of an innovative hybrid thermal energy storage with phase change material (PCM) wall insulator utilizing Taguchi method