Abstract:Report the preparation of MoS2 nanosheets suspensions based on liquid exfoliation method. The suspensions are characterized by absorbance and photoluminescence (PL) spectroscopy. The results show the PL signal from suspensions is enhanced evidently. Meanwhile, obtain the optimized the process conditions which are increasing of ultrasonic time, decreasing of centrifugal rotational speed, using large-size bulk MoS2 and adding ball-milling process. The PL main peak of single MoS2 nanosheet is located at 652 nm, which corresponds to a band gap of 1.9 eV. Besides, the single MoS2 nanosheet is annealed. Because mild annealing could make the lattice distortion in MoS2 nanosheet which appeared in exfoliation reversed and the semiconducting property of the as-prepared MoS2 nanosheet is largely restored, the PL signal from single MoS2 nanosheet is enhanced after annealing. SEM and AFM show the most MoS2 nansosheets have a lateral size of several hundred nanometers and a thickness of several nanometers. Besides, prepare MoS2 nansosheets reinforced epoxy composites by mixing MoS2 nansosheets suspension and E51 epoxy. The PL signal from composites is enhanced as well. That means the MoS2 nansosheets dispersing in epoxy still keep enhanced PL signal and E51 epoxy could not influence the band gap properties of MoS2 nansosheets. The composites are annealed. And compared with the composites which are not annealed, the PL signal from annealing composites shows obvious shift which could be ascribed to residual thermal stress in the composites. Meanwhile, the toughness of the composites is also improved, and it is because of the excellent toughness of MoS2 nansosheets and the dispersion strengthening in the composites.

Nanosheets: Controlled Production of MoS 2 Full‐Scale Nanosheets and Their Strong Size Effects (Adv. Mater. Interfaces 24/2020)

Controlled Production of MoS 2 Full‐Scale Nanosheets and Their Strong Size Effects

Large Lattice Mismatch of Nanocomposite Coating: In-situ Establishment of MoS2 by Precursor and Desulfurization Reaction

Preparation of Single-Layer MoS(2x)Se2(1-x) and Mo(x)W(1-x)S2 Nanosheets with High-Concentration Metallic 1T Phase.

Large-scale Production of Defect-Free MoS2 Nanosheets Via Pyrene-Assisted Liquid Exfoliation

High‐Concentration Aqueous Dispersions of MoS2

High-metallic-phase-concentration Mo1–xWxS2 nanosheets with expanded interlayers as efficient electrocatalysts

Dynamically Induced Large‐Scale, Selective, and Vertical Structure Growth of MoS 2 Nanosheets

Preparation And Properties Of Mos2 Nanosheets And Mos2 Nanosheets/Epoxy Composites

From MoO2@MoS2 Core-Shell Nanorods to MoS2 Nanobelts

Large-Scale Production of Two-Dimensional Nanosheets

Template-free scalable growth of vertically aligned MoS2 nanowire arrays meta-structural films towards robust superlubricity

Preparation and Properties of MoS2 Nanosheets and Their Epoxy Composites

Direct Exfoliation Of Natural Sio2-Containing Molybdenite In Isopropanol: A Cost Efficient Solution For Large-Scale Production Of Mos2 Nanosheetes

Efficient Exfoliation of Molybdenum Disulphide Nanosheets by a High-Pressure Homogeniser

Scalable salt-templated directed synthesis of high-quality MoS2 nanosheets powders towards energetic and environmental applications

Scaling behavior of nanoimprint and nanoprinting lithography for producing nanostructures of molybdenum disulfide

Carbon nanotube hybrids with MoS 2 and WS 2 synthesized with control of crystal structure and morphology

Exfoliation of Bulk 2H-Mos 2 into Bilayer 1T-Phase Nanosheets Via Ether-Induced Superlattices

Edge Epitaxy of Two-Dimensional MoSe2 and MoS2 Nanosheets on One-Dimensional Nanowires.

Controlled Scalable Synthesis of Uniform, High-Quality Monolayer and Few-layer MoS 2 Films