Abstract:The development of lithium–sulfur (Li–S) batteries is of practical significance to meet the rapidly escalating demand for advanced energy storage technologies with long life and high-energy density. However, the dissolution and shuttling of the intermediate polysulfides (PS) initiates the loss of active sulfur and the poisoning of the lithium anode, leading to unsatisfactory cyclability and consequently hinders the commercialization of Li–S batteries. Herein, we develop a facile strategy to tame the PS dissolution and the shuttling effect in the Li–S system by introducing a modified polybenzimidazole (mPBI) with multiple functions. As a binder, the excellent mechanical property of mPBI endows the sulfur electrode with strong integrity and, therefore, results in high sulfur loading (7.2 mg cm−2), whereas the abundant chemical interaction between mPBI and PS affords efficient PS adsorption to inhibit sulfur loss and prolong battery life. As a functional agent for the separator, the mPBI builds a PS shield onto the separator to block PS’s migration to further suppress the PS shuttling. The dual actions of mPBI confer an excellent performance of 750 mAh g−1 (or 5.2 mAh cm−2) after 500 cycles at C/5 on the Li–S battery with an ultralow capacity fading rate of 0.08% per cycle. Researchers have used a super-stable polymer to block adverse dissolution effects in energy-rich rechargeable lithium-sulfur batteries. Polybenzimidazole (PBI) polymers find use in firefighting equipment and astronaut spacesuits because of their high mechanical and thermal stability. Research team led by Shanqing Zhang from Griffith Universityin Australia and Zhoupeng Li from Zhejiang University in China now shows that PBI can make an attractive binder and separating agent for next-generation batteries. While the lithium-sulfur system has higher energy density than current lithium-ion batteries, polysulfides shuttling effect, the main technical barrier often degrades device efficiency. The team prepared a new electrode by mixing a sulfur-carbon composite with a modified form of PBI. They found battery durability improved by three to five times over typical polymer binders, while favorable binding interactions between PBI and polysulfides enhanced performance and cycling stability. A modified polybenzimidazole (mPBI) was synthesized to tame the polysulfides (PS) shuttling in Li–S batteries via dual actions. As a binder, the mPBI mechanically and chemically offers strong electrode integrity and high sulfur loading, inhibits sulfur loss and prolongs lifespan for sulfur electrode. As a functional agent, the mPBI builds a shield onto the separator to block PS migration so as to further suppress the PS shuttling. This strategy confers an excellent performance of 750 mAh g−1 (or 5.2 mAh cm−2) after 500 cycles at C/5 for the resultant Li–S battery with an ultralow capacity fading rate of 0.08% per cycle.

Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 Ceramic Based Lithium‐Sulfur Batteries with High Cycling Stability Enabled by a Dual Confinement Effect for Polysulfides

Li1.5Al0.5Ge1.5(PO4)3 Ceramic Based Lithium‐Sulfur Batteries with High Cycling Stability Enabled by a Dual Confinement Effect for Polysulfides

A Design of Solid-State Li-S Cell with Evaporated Lithium Anode to Eliminate Shuttle Effects.

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

In Situ Synthesis of Li2S‐Loaded Amphiphilic Porous Carbon and Modification of the Li2S Electrode for Long‐Life Li2S Batteries

A Multi Functional Binder with Lithium Ion Conductive Polymer and Polysulfide Absorbents to Improve Cycleability of Lithium–sulfur Batteries

Rationally Designed in-Situ Gelled Polymer-Ceramic Hybrid Electrolyte Enables Superior Performance and Stability in Quasi-Solid-State Lithium-Sulfur Batteries

Dual taming of polysufides by phosphorus-doped carbon for improving electrochemical performances of lithium–sulfur battery

A Lithium/Polysulfide Battery with Dual-Working Mode Enabled by Liquid Fuel and Acrylate-Based Gel Polymer Electrolyte.

A Polysulfide-Immobilizing Polymer Retards the Shuttling of Polysulfide Intermediates in Lithium-Sulfur Batteries.

A gel-ceramic multi-layer electrolyte for long-life lithium sulfur batteries

Stable Cycling Lithium-Sulfur Solid Batteries with Enhanced Li/Li10GeP2S12 Solid Electrolyte Interface Stability

Constructing Stable Anodic Interphase for Quasi-Solid-State Lithium–Sulfur Batteries

Integrating Lithium Sulfide as a Single Ionic Conductor Interphase for Stable All-Solid-State Lithium-Sulfur Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Boosting the Electrochemical Performance of Li-S Batteries with a Dual Polysulfides Confinement Strategy

Mitigation of Shuttle Effect in Li-S Battery Using a Self-Assembled Ultrathin Molybdenum Disulfide Interlayer.

Promoting Reversible Redox Kinetics by Separator Architectures Based on CoS 2 /HPGC Interlayer as Efficient Polysulfide‐Trapping Shield for Li–S Batteries

Engineering conductive and catalytic triple-phase interfaces for high efficiency polysulfides conversion in Li-S batteries

The Dual Actions of Modified Polybenzimidazole in Taming the Polysulfide Shuttle for Long-Life Lithium–sulfur Batteries

Li2S in Situ Grown on Three-Dimensional Porous Carbon Architecture with Electron/Ion Channels and Dual Active Sites As Cathodes of Li-S Batteries