Abstract:Aramid nanofibers (ANFs) have great potential for civil and military applications due to their remarkable mechanical modulus, excellent chemical reliability, and superior thermostability. Unfortunately, the weak combination of neighboring ANFs limits the mechanical properties of ANF-based materials owing to their inherent rigidity and chemical inertness. Herein, high-performance nanopapers are fabricated by introducing a tiny amount of cellulose nanofibrils (CNFs) to serve as reinforcing blocks via vacuum filtration. As a result of the formation of nanosized building blocks and hydrogen-bonding interaction of CNFs, the resultant ANF/CNF nanopaper yields a record-high tensile strength (406.43 ± 16.93 MPa) and toughness (86.13 ± 5.22 MJ m–3), which are 1.8 and 4.3 times higher than those of the pure ANF nanopaper, respectively. When normalized by weight, the specific tensile strength of the nanopaper is as high as 307.90 MPa·g–1·cm3, which is even significantly superior to that of titanium alloys (257 MPa·g–1·cm3). The ANF/CNF nanopaper also possesses excellent dielectric strength (53.42 kV mm–1), superior UV-shielding performance (≥99.999% absorption for ultraviolet radiation), and a favorable thermostability (Tonset = 530 °C). This study proposes a new design strategy for developing ultrathin ANF-based nanopapers combined with high reliability and thermostability for application in high-end electrical insulation fields, such as 5G communication, wearable electronics, and artificial intelligence.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01597.AFM images of ANFs and CNFs; SEM images and diameter distribution of ANFs and CNFs; FTIR spectra and UV–vis absorbance of the nanopapers; rheological behavior of ANFs and CNFs; the stress–strain curves and UV–vis transmittance of the pure CNF nanopaper; XPS N 1s and C 1s spectra of the nanopapers; the density of ANF/CNF nanopapers; the cyclic tensile curve of ANF/CNF-2 nanopaper; SEM images of fractured nanopapers; optical photographs and surface wettability of nanopapers; UV–vis transmittance of nanopapers that were treated by photoexcitation; TG and DTG curves of nanopapers; the data of mechanical properties of the pure ANF, and pure CNF and ANF/CNF nanopapers and composite films in the literature (PDF)Video of lifting a pile of iron with the ANF/CNF-2 nanopaper (Movie S1) (AVI)Weighting this iron (Movie S2) (AVI)Video of the flame test (Movie S3) (MP4)This article has not yet been cited by other publications.

Alignment Controlled Aramid Nanofiber‐Assembled Films

Functionalized Aramid Nanofibers Prepared by Polymerization Induced Self-Assembly for Simultaneously Reinforcing and Toughening of Epoxy and Carbon Fiber/epoxy Multiscale Composite

Rapid and Scalable Synthesis of Novel Carboxylated Aramid Nanofibers for Simultaneously Improving the Strength and Toughness of Carbon Fiber/epoxy Laminates

Aqueous Dispersion of Aramid Nanofibers Achieved by Using Tannic Acid for Ultrahigh Strength Films

Dispersions of aramid nanofibers: a new nanoscale building block

Highly Intrinsic Thermal Conductivity of Aramid Nanofiber Films by Manipulating Intermolecular Hydrogen Bonding Interactions

Metal ion-assisted fabrication of aramid nanofilm with high strength and toughness for the dye separation

Mechanically Strong Electrically Insulated Nanopapers with High UV Resistance Derived from Aramid Nanofibers and Cellulose Nanofibrils

A Synergistic Interfacial and Topological Strategy for Reinforcing Aramid Nanofiber Films.

Large-area ultrastrong and stiff aramid nanofiber based layered nanocomposite films

Timesaving, High-Efficiency Approaches to Fabricate Aramid Nanofibers

Highly thermally conductive composite films by the rational assembly of aramid nanofibers with low-dimensional nanofillers

Fabrication, Applications, and Prospects of Aramid Nanofiber

Mechanically robust ultrathin nanofibrous films by using microfluidic-based continuous printing

Tailored carbon-based aramid nanofiber nanocomposites with highly anisotropic thermal conductivity and superior mechanical properties for thermal management

Preparation and Mechanical Properties of UV-Curable Epoxy Acrylate/Modified Aramid Nanofiber Nanocomposite Films

Solvent‐Induced Deformation of Aramid Nanofibers for Ultrahigh‐Flux Nanofiltration Membranes

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Controlled Structural Relaxation of Aramid Nanofibers for Superstretchable Polymer Fibers with High Toughness and Heat Resistance

A new 3D printing strategy by enhancing shear-induced alignment of gelled nanomaterial inks resulting in stronger and ductile cellulose films

Two-step re-protonation strategy to fabricate aramid nanofiber sheet (ANFS) based high performance composite film